Transmission 2.77+ 2.8x Leecher Mod Windows & Linux

[tr-cht-fx-242p]

SB-Innovation Presents

>>>>>> Transmission 2.77+ 2.9x Leecher Mod Windows & Linux <<<<<<

Attachment 14759

╔═══════════════════════════╗
Coded by:
╚═══════════════════════════╝

>>>>>> transmissionbt.com <<<<<<

╔═══════════════════════════╗
Modded by:
╚═══════════════════════════╝

>>>>>> tr-cht-fx-242p <<<<<<

╔═══════════════════════════╗
Changelog / Features:
╚═══════════════════════════╝


All Platforms

transmission-daemon

Mod features:

• Remote GUI and Web Client_________
• Always Leecher, report 0%__________
• Always Seeder, report real up, no down
• Report a ratio of ~2________________
• Report a ratio of ~4________________

Other features

• 2.77 core and kept up to date with official transmission 2.9x github.

Also included, among several others,
are many additional bug fixes and enhancements not limited to:

• Prefetching of magnetized metadata right away
• Improve “No Data Found” error message and recovery behavior
• Make it possible to choose what files to download after getting magnet metadata
• Seeding progress bars do not show in Web UI
• The correct implementation of Blocklists loaded in Transmission should be used to filter DHT communication
• Collect unwanted, but received, blocks in a separate file
• Skip verify check
• Reverify on completion
• Streaming of the torrent's file(s)
• Run external application or script on torrent add
• Webseed reimplementation
• Prevent peers stalling both magnet acquisitions, uploads and downloads

Official configuration settings: https://trac.transmissionbt.com/wiki...gFiles#Options
Unofficial additional settings (all platforms) : transmission-daemon-cygwin / Discussion / General Discussion:Additional Settings



Windows
Windows XP and higher, 32 or 64 bit.
32-bit (will run everywhere)
64-bit only on 64-bit versions of Windows.

Linux
For Linux first compile modded source.
https://trac.transmissionbt.com/wiki/Building
After compiling replace the web client with the included modded web-client.

MAC
For MAC first compile modded source.
https://forum.transmissionbt.com/vie...hp?f=4&t=15167
After compiling replace the web client with the included modded web-client.



GUI

transmission remote gui

Will connect to a daemon running on any platform.

Select the torrent(s) you want and then right click and choose Properties... (you can double click a single torrent). For the cheat/Announce mode mode enter a value between 990 and 994 into the Peers box.
Values between 990 and 994 are treated as such:

• 990 = Normal Announce, no cheat_________
• 991 = Always Leecher, report 0%__________
• 992 = Always Seeder, report real up, no down
• 993 = Report a ratio of ~2________________
• 994 = Report a ratio of ~4________________

Values 989 or less are entered as the Peer Limit.

Cheat/Announce column on the main panel.
You can move the column where you want it.

Other features

• Skip Verify
• Show Verify Queue status
• Seeding time column
• Seeding time also shown next to ratio in torrent info pane
• Include paused torrents in error filter
• Unicode support
• Blocklist entry count display & change
• Seed Ratio column
• Set Streaming mode of the torrent's file(s)
• x
• x

transgui.exe included for Windows.

transgui for Mac ( thanks Instab ! ) some graphics problems, have a look for yourself ...

To compile yourself for Linux ( Windows or Mac also ) Building - transmisson-remote-gui - Building Transmission Remote GUI from sources - Cross platform remote GUI for the Transmission Bit-Torrent client - Google Project Hosting You will need lazarus-0.9.30 and fpc-2.4.2 from Lazarus | Free Development software downloads at SourceForge.net


Web Client
Use the clutch web client you right-click torrent(s) and select cheat/Announce Mode from there. Inspector displays mode also.

Attachments here below will be kept latest stable release and will supersede or equal any posts which follow.

[albus]

Sorry for the response time and thank you for your work and your answers.
I take this opportunity to wish you a very happy new year 2019.

I just recompiled with the file you attached and the result is the same.
When checking the version of libevent, I have version 2.0.5 installed. I enclose the result of the command dpkg -l | grep libevent:
ii libevent-2.0-5:armhf 2.0.21-stable-3 armhf Asynchronous event notification library
ii libevent-core-2.0-5:armhf 2.0.21-stable-3 armhf Asynchronous event notification library (core)
ii libevent-dev 2.0.21-stable-3 armhf Asynchronous event notification library (development files)
ii libevent-extra-2.0-5:armhf 2.0.21-stable-3 armhf Asynchronous event notification library (extra)
ii libevent-openssl-2.0-5:armhf 2.0.21-stable-3 armhf Asynchronous event notification library (openssl)
ii libevent-pthreads-2.0-5:armhf 2.0.21-stable-3 armhf Asynchronous event notification library (pthreads)


For information, here is the procedure I followed to recompile:
sudo make uninstall
make clean
(replace the file peer-io.c)
./autogen.sh
make
sudo make install

Thanks and regards,
Albus

[tr-cht-fx-242p]

Hi Albus,

Use the original peer-io.c
The Raspberry pi needs to have openssl
https://raspberrypi.stackexchange.co...-raspberry-pi3
https://www.raspberrypi.org/forums/v...c.php?t=123279

Transmission, not just libevent openssl
https://stackoverflow.com/questions/...end-on-openssl

I do not have an RPi raspberry but I see some references to compile problems here
https://github.com/transmission/transmission/issues/313
where some say static linking compilation fixes.

So lets see if addressing openssl situation on your RPi 3+ solves the problem. :)

[sb86]

thank you tr-cht-fx-242p for your great help and effort. when using this mod trackers see me as using "Transmission 2.77"
how can i change it ? i mean i want trackers to see me using "Transmission 2.94 (d8e60ee44f)" instead of 2.77 version ?

[tr-cht-fx-242p]

Edit the settings.json file before starting the daemon
or using the SHift web client while the daemon is running.


It's all good for any version transmission you want, only if you spoof another client (vuze, uTorrent, whatever-you-want) would there be announce conflicts with the real counterpart.

__________________________________________________ ______

Official released version 2.94 (d8e60ee44f)

"client-version-bep10": "Transmission 2.94",
"peer-id-prefix": "-TR2940-",
"user-agent": "Transmission/2.94",

__________________________________________________ ______

Official transmission github beta as of January 09, 2019 (4a4233feae)

"client-version-bep10": "Transmission 2.94+",
"peer-id-prefix": "-TR294Z-",
"user-agent": "Transmission/2.94+",

__________________________________________________ ______

[sb86]

thank you it worked. but it seem like the tracker do not recognize my IP now it shows "127.255.255.255" instead of my real ip. by the way i don't use any VPN. do you have any idea ?

[tr-cht-fx-242p]

thank you it worked. but it seem like the tracker do not recognize my IP now it shows "127.255.255.255" instead of my real ip. by the way i don't use any VPN. do you have any idea ?

I don't see how anything you've setup with your system could cause 127.255.255.255.
This looks like a problem with whatever tracker you are using. Probably they have the server set up to use signed INT or INT when they should be using unsigned INT or BIGINT. Values >= (128.0.0.0) 2147483648 will be stored as (127.255.255.255 ) 2147483647. I suspect they have a lot of 127.255.255.255 showing up; all IPs >= 128.0.0.0

[anon]

You can always cross-check with an unmodified client, but this is definitively a tracker glitch. I once had a proxy that caused my address to be displayed and stored as "####" by PHP.

Although it would be cool if masking your IP as localhost broadcast was an actual mod feature

[sb86]

many thanks for you all "tr-cht-fx-242p" and "anon" you're right anon it's a tracker glitch, now the tracker can show my real ip.
now i have a question please:
this is my setup: I've compiled this client and installed it in my router which is connected to an external usb hdd 4tb. now the client work perfectly without any problems. i will use the router just for leeching and i've changed the default setting of my client to use the mode :Always Leecher, report 0%. so the downloaded torrents will be stored in the external HDD.
I want to use the windows version of transmission just to fake up upload and get the torrent downloaded in my laptop's HDD not the hard drive connected to my router.
so when at home using just my laptop to fake up upload and when at work use my router instead.
i'm afraid that if using just leecher mode then private trackers can suspect and disable my accounts.
can you please suggest me the safest way to do what i want ?
it is possible to use mRatio with this client ?

[tr-cht-fx-242p]

The windows transmission mod is the same.

It might help to begin and read what is discussed here: http://www.sb-innovation.de/showthre...l=1#post330078

Upload speed can be set, per torrent or globally, to 0 (zero)
which really does send no torrent pieces at all to peers
but still downloads. Faking upload to tracker however you set faking.

A faked upload ratio is always off the amount actually downloaded,
never the uploaded amount, so I typically use upload speed 0 (zero).

When using Report a ratio ~2 (plus an optional cheat ratio offset)
fake upload speed will be directly proportional
to your finished % based on the files you have
selected to download. This Slows faking down.

If a torrent is set at Ratio ~4 (plus the optional cheat ratio offset) is used
a proportional ratio is NOT calculated. I rarely use this.

See this post also: http://www.sb-innovation.de/showthre...l=1#post330108

This is how I go about it most of the time.

[anon]

I want to use the windows version of transmission just to fake up upload and get the torrent downloaded in my laptop's HDD not the hard drive connected to my router.
so when at home using just my laptop to fake up upload and when at work use my router instead.
i'm afraid that if using just leecher mode then private trackers can suspect and disable my accounts.

Firstly, I don't understand this logic. If using leecher mode puts you at risk, then using leecher mode and fake upload would put you at more risk, not less.

Secondly, any torrents that use leecher mode should be stopped as soon as they're completed. Keeping them running further would only increase your window of exposure (you keep stating you're at 0% done while others report upload).

Finally, running mRatio and this client at the same time is not recommended, since Transmission uses a global key that mRatio can't read or capture. RatioMaster Plus, however, has a memory reader feature that works on all clients and even remote instances too, which would make it safe to use.

[sb86]

Finally, running mRatio and this client at the same time is not recommended, since Transmission uses a global key that mRatio can't read or capture. RatioMaster Plus, however, has a memory reader feature that works on all clients and even remote instances too, which would make it safe to use.

Ok thank you so much , now can I use mRatio separately ? I mean just use the same port and client version , and before starting mRatio I’ll pause all my client’s torrent is that good anon ?
When it comes to ratiomaster plus I want to use it but I did a check for virus! And guess what I found, you can see this link : https://www.virustotal.com/#/file/56...44f4/detection
so please anon can you explain to me why these virus are inside ratiomaster plus ? another thing weird when I scan the file with my antivirus there is nothing !!!! really it sound crazy.

[anon]

Ok thank you so much , now can I use mRatio separately ? I mean just use the same port and client version , and before starting mRatio I’ll pause all my client’s torrent is that good anon ?

Yes, that would be OK.

When it comes to ratiomaster plus I want to use it but I did a check for virus! And guess what I found, you can see this link : https://www.virustotal.com/#/file/56...44f4/detection
so please anon can you explain to me why these virus are inside ratiomaster plus ? another thing weird when I scan the file with my antivirus there is nothing !!!! really it sound crazy.

There is no virus, it's a false positive.

[sb86]

hi again, can you please mod the latest GUI "Transmission Remote GUI version 5.0.1".
the modded one has version 3.2.1.
the latest one has many function like the application option in the tools menu, and another menu "View".
and it's DPI is better than the old one.
can you do that tr-cht-fx-242p ? and thank you for your awesome work.

[tr-cht-fx-242p]

Version 5.0.1 is wildly outdated, use version 5.16 as Transmission Remote GUI is currently maintained here: https://github.com/transmission-remote-gui/transgui
Released Dec 26, 2018 https://github.com/transmission-remo...nsgui/releases

You can run the mod version both at once simultaneously with v5.16. Start with an empty (zero byte) transgui.ini in the installed directory of transgui.exe. You don't need to even install it, simply place transgui.exe in a directory along with an empty transgui.ini and run it. The same goes for the mod version in a different directory.

transgui-5.16.0-i386-win32.zip from them is the .exe
Or the installer transgui-5.16-setup.exe then place the empty transgui.ini

Note that GeoIP.dat is no longer maintained and you'll need to put that in the directory also; found at:
.\Transmission-Remote-GUI-PS.zip\Transmission-Remote-GUI-PS\Windows\flags&GeoIP-backup-use-if-needed\GeoIP.dat
https://github.com/transmission-remo...ui/issues/1195

__________________________________________
PORTABLE MODE
If the program finds the transgui.ini file in the same folder as the binary file, then it will store all configuration and data files in the program's folder, instead of the folder in a user profile.

In this way there can be run multiple versions (two or more), and even simultaneously, on the same system.

https://github.com/transmission-remote-gui/transgui
__________________________________________

[sb86]

thank you for the awesome work, so i have to use the 2 GUI : the modded one to cheat and the regular one to access more settings.
but what i want of course if possible is that i can use only the latest version 5.16 with cheating capabilities.
anyway you're a transmission leecher coder's God :)