View Full Version : uSerenity settings with description
http://www.sb-innovation.de/attachment.php?attachmentid=21132
Click SAVE settings on first manager run, else default profile would do NOTHING
DHT-Patch: (always on by default)
Ignores the private flag, so DHT and Peer Exchange is enabled for ANY new torrent. – so you can get more peers and sends on your torrents
No-Upload:
Disables uploading for all torrents. It's based on the code used in this (http://www.sb-innovation.de/showthread.php?22884-Utorrent-2-0-4-Build-22450-No-Upload) mod.
-Be seeder:
Your “left to download” stat is always reported to tracker as 0%. *So that says you already have everything.
-Be leecher:
Your “left to download” stat is always reported to tracker as 100%. *So that says you didn’t download anything.
-No report Download:
Your download isn’t reported to the tracker. (always reported as zero) *So you don’t have to worry about your ratings and faking stats.
-No report Upload:
Your upload isn’t reported to the tracker. (always reported as zero) *So you don’t have to worry about your ratings and faking stats.
-No report Corrupt:
Your “downloaded corrupt file-parts” stat isn’t reported to tracker (always zero). *If you didn’t download anything, how come you downloaded something corrupt?!
-Don’t announce Completed event:
The completed event isn’t sent to the tracker. (No entry in the snatchlist or smth like that) *And yes it is really not reported, not like in other mods, here it just doesn’t send anything to tracker when you complete a torrent.
-Connect tracker just Once on start to grab peers:
You connect to tracker just once on .torrent start to grab peers, on timeout you will be removed from peerlist in torrent profile on tracker’s website
-Upload Multiplier:
Multiplies your uploaded stats being sent to tracker by a random number in the range you choose
-FakeUpload:
Every second after .torrent start random number in the range you choose is added to uploaded stat which will be sent to tracker depend less upload you or not, you can specify minimal amount of peers to be connected to in order to add fake upload
-Multiply speed by number of peers connected:
Multiplies your fake upload speed by the number of peers you're connected to. You can specify the maximum multiplier so that speeds don't get out of control.
-Add your real uploaded to fakeuploaded:
Adds your real uploaded amount to the fake upload.
-Per Torrent settings:
You can choose settings for each .torrent you has (noupload, nocomplete, fakeupload etc) using labels
Instruction for Installation:
-Unzip contents to your Utorrent folder (or anywhere else)
-Make a shortcut of uSerenity to your desktop (or don’t)
-Add setting-profiles in uSerenity -settings manager-
-Use them as labels in uSerenity
-Check about page in uTorrent Serenity to see if it is loaded ^_^
Labels:
-Case insensitive
-Works if found inside label string (eg. profile “stealth” in label “(Stealthy) Porn”
-No label or no label matching setting profile = default settings profile will be used
Take in mind
In order for the mod to work properly, you need to run uSerenity Settings.exe and create/save profiles before running uSerenity.exe. Running uSerenity Settings.exe, and going to File -> Save will create a serenity_settings.cfg file with the Default and Normal profiles present in manager by default.
You may create custom profiles with any name if you desire, and edit existing ones. Going to File -> Save will save your custom settings in the serenity_settings.cfg file. When you run uSerenity.exe the Default profile setting is loaded from the config file (if it isn't present uSerenity will have No profiles meaning there would be no cheating actions done to torrents - except DHT-patch - it's ON by default).
If you would like to use other profile for a torrent:
Right-click on a torrent you desire to cheat on -> Label -> New Label. Put cheating profile name here (case insensitive) to use its settings for that torrent.
Empty label or label without any profile name present in settings manager means that Default profile will be used.
Other:
-announces are fully correct and don’t differ from normal uTorrent announces to tracker (rare thing nowadays)
-Should be faster than original Utorrent (nocompression)
-Nice bright icons and changed about window
-Noinstall – it just launches
-If you use portable mode so uSerenity will use it for its settings
if you'r getting "Application failed to initialize (0xc0150002). To exit, press the "OK"" then install this Microsoft package (http://www.microsoft.com/downloads/details.aspx?familyid=a5c84275-3b97-4ab7-a40d-3802b2af5fc2&displaylang=en)
ps - cuz writing all this in every release is a waste of space i thought about splitting it into two, into releases and into features page which is this, hope you don't mind ^_^ :wsearch:
ps - cuz writing all this in every release is a waste of space i thought about splitting it into two, into releases and into feautures page which is this, hope you don't mind ^_^ :wsearch:
It's fine, and you can add a link to this thread for your future releases, instead of the usual, huge text wall.
It's fine, and you can add a link to this thread for your future releases, instead of the usual, huge text wall.
that's why i made this in the first place :D
1. This is awesome, makes this mod even better.
2. Please run this wall of text through a spell check :- (
sry, my firefox doesn't have english dictionary :- (
spell check - Google Search (http://www.scroogle.org/cgi-bin/nbbw.cgi?Gw=spell+check&n=2)
Or you can have the anonbot fix it for you.
So I kind of don't understand this
-Unzip contents to your Utorrent folder (or anywhere else)
-Make a shortcut of uSerenity to your desktop (or don’t)
-Add setting-profiles in uSerenity -settings manager-
-Use them as labels in uSerenity
What exactly do I need to do?
So I kind of don't understand this
What exactly do I need to do?
see General - FAQ - µTorrent - a (very) tiny BitTorrent client (http://www.utorrent.com/faq#faq9) and write setting profile name as a port of the label
I'm guessing you're reffering to this "What are labels and what can they be used for?", right?
So I just open a torrent and write a label that the same as in Settings Manager?
Seems like a nice mod, but the explanation is a little too short for me, maybe you should specify what you (we) need to do exactly to run this mod?
-Do we need to launch uSerenity Settings before uTorrent, or after, do we need to keep it open?
Let's say i want to simply fake the upload to 8x (for all my torrents) what do I need to do ?
Launch uSerenity Settings, tick Upload Multiplier for "Default" Profile and then launch utorrent and i'm done?
Or do i need to go to file then load or whatever ?
I know that's a lot of questions, but the aim is to make the steps required clear for everyone :)
Thank you for working on that, I will definitely use it as soon as i'm sure about what i'm doing :klatsch_3:
what you (we) need to do exactly to run this mod?
double-click it with the left mouse button ;)
Do we
we don't do what isn't written in instruction ;)
Let's say i want to simply fake the upload to 8x (for all my torrents) what do I need to do ?
change default setting profile using settings manager (yes, click save button after you'r done) then launch uTorrent Serenity, all done.
I'm guessing you're reffering to this "What are labels and what can they be used for?", right?
So I just open a torrent and write a label that the same as in Settings Manager?
can you show me a picture ??
What are you exactly having problems with?
In uTorrent, you can set a label by right-clicking the torrent -> Labels -> New Label.
-Check about page in uTorrent Serenity to see if it is loaded ^_^
What exactly should I see? Sorry, I don't get the label thing..
I've created a label for 3 torrents. I've created profile with the same name in -settings manager-. Now what?
All that I can see is the torrents are downloading (and what if Idon't want to download it but report that I already have) and uploading with almost no speed.
Is -settings manager- should be always open?. What the exact sequence of doing things..
Thanks in advance.
Is -settings manager- should be always open?
No.
I've created labels in uTorrent - Serenity.
I've created profiles with the same name in -setting manager-.
I can't see anything in the Aboun page, and the torrent is downloading even though I've checked:
Be Seeder, no report download, no report corrupt, don't anounce, and fake upload..
Please advice, what should I do in order to fake an outside seeding in TL: Torrent that I'm only seeding but didn't downloaded at all?
Thanks
Be Seeder, no report download, no report corrupt, don't anounce, and fake upload..
Why?
And of course the torrent will download if you pick "be seeder". You have to untick all files when adding it if you don't want that to happen.
Why?
I don't know.
And of course the torrent will download if you pick "be seeder". You have to untick all files when adding it if you don't want that to happen.
So how I'm gonna "tell" the tracker that I've already has 100% and only want to seed?
Please advice correct setting for:
1. Comlpetely fake. Don't want to download the torrent but want to fake-seed (like mRatio).
2. Partial fake. Want to download the torrent, don't want the tracker count the download and fake-seed.
3. Up-fake. Want to download the torrent, want that the tracker will count the download and fake-seed.
anon, plesae be kind and advice the correct settings. I waited to long for an TL invite, and don't wanna mess it up.
Thank you.
I mixed it up with "announce just once", sorry!
1. be seeder, no report download, no report upload, no report corrupt, don't announce completed event, fake upload, untick all files when adding the torrent
2. be seeder, no report download, no report upload, no report corrupt, don't announce completed event, fake upload
3. it doesn't make much sense to be a seeder but report download.
Thank you!! :thumbsup:
untick all files when adding the torrent
Sorry, don't get it... :sm61:
When I'm adding a torrent it goes to "No label" (=Default profile on -setting manager-). Am I right? What next?
Sorry, don't get it... :sm61:
When you add a torrent in uTorrent, a window to choose where to save it and which files you want to download appears. Click "Select None" there.
When I'm adding a torrent it goes to "No label" (=Default profile on -setting manager-). Am I right?
I think yes. :unsure:
What next?
What do you mean?
a window to choose where to save it and which files you want to download appears.
Oh! Silly me! I had set it all automatic!!
http://img819.imageshack.us/img819/517/torrentp.jpg
no report upload and fake upload can't be ticked together. I think if I want to boost my upload ratio, a should tick fake upload...
I think I'm starting to get to the bottom of all this.. But still, 2 options are not clear to me:
-Be leecher
-Connect tracker just Once on start to grab peers
---------- Post added at 21:44 ---------- Previous post was at 19:23 ----------
3. it doesn't make much sense to be a seeder but report download.
Why not? A the end the SnatchList will be full of "outside seeding", zero downloaded torrents with fake upload ratio.
Why not, for example if the torrent is 5GB, to report the 5GB and fake-upload 10 or 15GB. That way they will never suspect a thing.
Not working for me.
1.Downloaded userenity 2.0.4
2. Open setting manager
3. Just tick only at Be seeder 100 % - Because I wants to appear at tracker only as seeder. I dont have any original files of particular torrents.
4. Download the torrent from the site. Open it in userenity.
5. I tried both ( select all files / deselect all files )
6. but everytime userenity is start to download the torrent !!
7. What I am doing wrong ?
Make sure that uSerenity and a client that you used to download the torrent have the same 'Location of Downloaded files' in Preferences/Directories. To verify that - right click on the torrent file in uSerenity and select 'Force re-check', it should show 100% after scanning.
I dont have any original files of particular torrents
so whats the point to set download directory ? I just want to fake seeding at 0Kbs and want to appear as seeder at tracker for gaining bonus seed point. Is it possible ? if yes, why its not work ?
Sorry, misread that one. You said that even with all files deselected uSerenity is trying to download. It's odd. Have you tried the original uT with all files deselected?
Why not, for example if the torrent is 5GB, to report the 5GB and fake-upload 10 or 15GB. That way they will never suspect a thing.
That's showing up as a leecher first, and then becoming a seeder. But showing up as a seeder and reporting download will obviously raise a red flag.
DriftKing, Serenity shouldn't download anything at all if you untick all files... please try it with the official uT as seldom said.
DriftKing, Serenity shouldn't download anything at all if you untick all files... please try it with the official uT as seldom said
You can't get me. I want a become a fake seeder like RM does it. Just download torrent, set it to 100 % complete and start fake uploading at any speed. I just want to become a seeder without download anything in real. Is it possilbe in userenity ? if yes, how ? I tried it with tick at Be seeder 100 % saved it. Downloaded torrent and open it in userenity but it trying to download the torrent like Official uT do. !
I tried it with tick at Be seeder 100 % saved it. Downloaded torrent and open it in userenity but it trying to download the torrent like Official uT do. !
And you tried it unticking all files? And that didn't work?
If so, please check what I said.
I tried it and its happen same at both - uSerenity and uT
http://imgur.com/O3cXq.png
Ermm... the pic's fine.
It says "downloading", but it isn't doing so. It only says that because you're not seeding. (It's either black or white!)
Nothing to worry about!
That's showing up as a leecher first, and then becoming a seeder. But showing up as a seeder and reporting download will obviously raise a red flag.
No, what I meant is that I'm downloading and uploading at the same time. I'm starting download at 500 kB/s and uploading at 100 kBs. Immediately. It's not that I download first and then start seeding. I seed right away. What's wrong with that? Nothing, right? I'ts like no cheating at all. The only difference, is that I really downloaded, but fake uploaded. I'm limiting my real upload to 1 kB/s but faking upload at 100 kB/s.
http://img521.imageshack.us/img521/866/dup.png
Anything suspicious here?
saebrtooth
08.09.10, 15:22
@Birkoff just from those stats u really cant see anything wrong with it
so ur downloading at exactly 500KB/s and ul at exactly 100KB/s?
If I dont select any lable from userenity, It will work like original uT ? because I dont wanna cheat at some tracker like What-PT-x264.so any harmful result to downloading with userenity from these tracker without any cheating ?
-No label = default settings profile will be used
so, whatever settings you have under 'Default' profile will be used for torrents with no labels.
I select non of option in default. so I think it shoud be ok. Isnt it ?
I select non of option in default. so I think it shoud be ok. Isnt it ?
I believe so. The only difference comparing to the official uT is
DHT-Patch: (always on by default)
Ignores the private flag, so DHT and Peer Exchange is enabled for ANY new torrent. – so you can get more peers and sends on your torrents
that may or may not be detectable by some trackers. Needs to be confirmed by somebody more knowledgeable than me :)
DHT-Patch: (always on by default)
But always its show me DHT disable ! btw, waiting for anon reply regarding post #35
It's not that I download first and then start seeding. I seed right away. What's wrong with that? Nothing, right? I'ts like no cheating at all.
Sure, nothing, as long as you seed Scene stuff, or what you can find on other trackers. Doing that on an exclusive torrent or pack, for example, is a big no-no.
image (http://img521.imageshack.us/img521/866/dup.png)
Anything suspicious here?
Looks good.
If I dont select any lable from userenity, It will work like original uT ?
The Default profile will be used in that case, and by default (heh), that means no cheating settings whatsoever.
so any harmful result to downloading with userenity from these tracker without any cheating ?
See above.
can I change the label of the torrent after a while !
example : cheating in a week ! then I want to stop cheating on this torrent ?
@Birkoff just from those stats u really cant see anything wrong with it
so ur downloading at exactly 500KB/s and ul at exactly 100KB/s?
Download, yeah.. It's not exactly 500k and steady, it's always jumping. But yeah, if I'll limit the download to 500k it'll be close to that. It's my real download speed..
Upload - in the -settings manager- you can choose between what speed the fake upload will be, so I'm pretty sure it's jumping between those speeds, like any real upload will be.
Sure, nothing, as long as you seed Scene stuff, or what you can find on other trackers. Doing that on an exclusive torrent or pack, for example, is a big no-no.
What's wrong with exclusives or packs? I don't mean "don't report download". I mean to really download it and (fake)upload it.
can I change the label of the torrent after a while !
Short reply: sure!
Slightly longer reply: what makes you think you can't?
I don't know but I didn't understand really the option of labels !!
labels in uTorrent why are they made in the first place ??
To categorize your torrents.
saebrtooth
09.09.10, 01:45
its the same as "category" in Vuze
Do I need to have the profile manager running in background while Serenity client is working?
Can I change profile settings while Serenity client is working? (don't need to restart Serenity or just a Save is enough in profile manager to change the settings on the fly?)
P.S. I have a couple of more questions here (http://www.sb-innovation.de/f59/how-use-serenity-mods-right-way-21805/index3.html) here please ^^
Do I need to have the profile manager running in background while Serenity client is working?
No. Why does everyone think that?
Can I change profile settings while Serenity client is working?
I wouldn't advice that.
added explanation for fixing 0xc0150002
Thank you very much for this great tool!
I´ve got one question..where can I see (in the Client) what´s my Fake-Upload?
Thank you,
Thank you very much for this great tool!
I´ve got one question..where can I see (in the Client) what´s my Fake-Upload?
Thank you,
under uploaded column
I´ve got one question..where can I see (in the Client) what´s my Fake-Upload?
But if that's answered right on the first post. :pinch:
-FakeUpload:
Every second after .torrent start random number in the range you choose is added to uploaded stat which will be sent to tracker depend less upload you or not, you can specify minimal amount of peers to be connected to in order to add fake upload
If it's the fake upload speed you want to see in the client, that's not possible.
Average upload speed in General tab appears to be the average Fake Upload Speed. One in parenthesis. Can give you a general idea of fake speed.
heh. thanks for negative rep whoever gave that.
Although I'm on SBI since 2 yars, I haven't used any cheating client until now -because I'm vip or at least with big ratio on the couple of trackers I currently use. But this pack looks like exciting.
Here are my needs:
On the sole tracker on which I have a rather weak ratio (0.9), I would like to cheat a bit -a moderate cheat, as stealth as possible, in order to easier keep my ratio in acceptable range. First objective is security (not be flagged as a cheater), and second (only second) objective is to cheat a bit in a moderate way.
So, i created a profile named "MySoleTracker" with the following settings:
Be Seeder: unchecked
Bee leecher: unchecked
No report download: unchecked
No report corrupt: unchecked
Don't announce completed event: unchecked (*)
Connect tracker just once: unchecked (*)
Fake upload checked
Between 0 and 9 kB/s
If there is at least 4 peers connected
Multiply speed by number of peers connected: checked
up to max: 3 peers
Add my real upload to fake uploaded: checked
An I have some questions. Please don't flame me, I'm a poor n00b in cheating, but have already consciously read the posts & explanations on this threat to educate myself first, and I will do my best to not ask too silly questions.
0) What do you globally think of my settings ?
1) For my purpose, would checking "connect tracker just once to grab peers" (and then disappear from peerlist) bring me some advantage ? I think not, but I'm unsure because I don't exactly know what all the implications of disappearing from the torrent peer list are.
2) same question with "don't announce completed event". Would have I some advantage to check it?
3) I see a problem with my settings, in some way related to what "a connected peer" exactly is: Suppose I'm on a swarm with many seeders and only one leecher (me). With the above settings, every (fake) uopload speed will set a flashy red flag (at least I think so). Same problem when in such a swarm my download will be finished, and if no new leecher goes in it: Upload would be nonsense. What have I to do in such circumstances ?
Notice that the problem is related to what "a connected peer" is: If a connected peer is a client trying to download from me, then in the firts previous case, this number is 0, with the setting "Multiply faked speed by number of peers connected" there is no more any problem, because this nummber being 0, the multiplication gives 0, total upload speed is 0, and all looks like perfectly normal.
If a "connected peer" could be a peers uploading to me, there is maybe no problem is the second case (only seeders in the swarm, me among them), because I see no reason to be connected to one of them, as I need no more any byte, so that the multiplication gives 0 agian. But in the first case, the problem remains.
Perhaps using only "upload multiplier" would be the best to do?
0. that's the slow and steady method, and it should work almost everywhere. Read this for more details:
http://www.sb-innovation.de/showthread.php?threadid=15507
1. don't tick that at all, otherwise your client won't be able to report the fake upload.
2. I wouldn't recommend it for what you want to do.
3. don't cheat on torrents with zero leechers. Try to find a more active one. And the upload multiplier would be a good idea if your real upload speed is good enough and you get to move data up.
with the setting "Multiply faked speed by number of peers connected" there is no more any problem, because this nummber being 0, the multiplication gives 0
nope, it just doesn't do any multiplies when 0, so it's 1x, if you want it to be 0 when 0 peers so check minumal number of connected peers to be greater than 0 (zero)
what "a connected peer" is
it's a peer you'r currently uploading to (not sure about downloading from but also probably)
and yes you set it up to work only you'r doing big upload so it'd be easier to use upload multiplier and limit your speed so you'd know what max speed you'd get with multiplier
1. don't tick that at all, otherwise your client won't be able to report the fake upload.
Yes, I though to something like that.
3. don't cheat on torrents with zero leechers. Try to find a more active one.
I agree with this principle, but the number of leechers is a dynamic data. A torrent could have 50 leechers when I begin to cheat, but then after a while, e.g. when i'm sleeping (what I do sometime) this number might drop to zero.
And the upload multiplier would be a good idea if your real upload speed is good enough and you get to move data up.
So I'm now convinced that a moderate multiplier is the best to do for my purpose. So, even if during my sleep the number of leechers drops to zero, there is no risk for me, because my real upload will drop to zerotoo, and so my faked multiplicated upload.
But I need some complementrary informations. As Owyn stated, checking this setting "multiplies your uploaded stats being sent to tracker by a random number in the range you choose".
Is this random number computed "once and for all", once per session, or many times during each session ??
@Owyn: Would it be appropriate, in a next version, to take in account only the number of connected leechers instead of total conneted peers in the FakeUpload subsettings (especially in the "multiply speed by the number of connected peers" one) ? So even if the number leechers drops to zero, my client no more will report any upload to the tracker ?
I agree with this principle, but the number of leechers is a dynamic data. A torrent could have 50 leechers when I begin to cheat, but then after a while, e.g. when i'm sleeping (what I do sometime) this number might drop to zero.
It's still better than a torrent which had 0 leechers to begin with.
I wouldn't advice sleeping when using cheating mods, also. :lol:
So I'm now convinced that a moderate multiplier is the best to do for my purpose. So, even if during my sleep the number of leechers drops to zero, there is no risk for me, because my real upload will drop to zerotoo, and so my faked multiplicated upload.
True.
@ Owyn: I was editing my #57 post while anon answered to the first version of this #57, and while you was answering to my post #54... :biggrin:
I apologize for the somewhat chaotic order of the questions which it has led. :rolling_eyes:
nope, it just doesn't do any multiplies when 0, so it's 1x
Interesting precision. I understand better now.
if you want it to be 0 when 0 peers so check minumal number of connected peers to be greater than 0 (zero)
Yes, but as you stated below concerning what exactly a "connected peer" is for µSerenity:
it's a peer you'r currently uploading to (not sure about downloading from but also probably)
I think it is the major point concerning what I asked. If a connected peer is only a peer I'm uploading to, there is no more problem: It indeed suffices to choose un number X greater than 0 and to set :
Fakeupload: checked
between <some range>
If there are at least X peers connected
In the case where there were no more leecher, there would be no more FakeUpload either.
But the problem still remains if a "connected peer" can be a peer I'm downloading from. Because each of the X connected peers in the FakeUpload condition could then be a seeder, and the FakeUpload then would set a red flag.
I think it would be more logical (at least at first sight) to allow the FakeUpload only conditionally to the number of peers I'm uploading to. I don't understand why the number of seeders would be taken into account.
and yes you set it up to work only you'r doing big upload so it'd be easier to use upload multiplier and limit your speed so you'd know what max speed you'd get with multiplier
I will use the multiplier. But at first sight I found the FakeUpload more sexy and more difficult to detect. It would be perfect if there weren't the previous risk to send a fake upload to the tracker's stat while no upload is possible.
Ps: A question concerning the multiplier I asked previously to anon, and to which he has not answered because I wrote it while he was answering to the first version of my #57 post:
As you stated, checking the multiplier setting "multiplies your uploaded stats being sent to tracker by a random number in the range you choose".
I would like to know whether this random number is computed "once and for all", once per session, or many times during each session ??
Edit: I have had an other idea: Your uSerenity setting manager offers 2 different methods in order to send fakeupload amoiut to the tracker's stats: A multiplicative one , and an "additive" (in some sense) one. Why not to combine each with other ?
I give an example: Suppose I first check random upload multiplier between, say, 2 and 10. When applied, this multiplicative rule produces a number I will name MultFakeUpload which is:
MultFakeUpload = true upload * some random number between 2 and 10
In the same time, suppose I check FakeUpload with range, say, [9, 100] (with your version, one can oubviously not check the 2 methods at the same time because this has no sense, but I'm presenting a way to give some sense to that). So suppose the two methods could be checked at the same time, and suppose that I check "add your real upload to FakeUpload" too. This additive rule produces a number I will name AddFakeUpload which is
AddFakeUpload = true upload + random number between 9 and 100
My idea is then to mix in some way the two previous faked numbers, and to send to the tracker's stats one of the following "mixed fake number":
First way:
MixedFakeUpload = Min(MultFakeUpload, AddFakeUpload)
Second way:
MixedFakeUpload = SQRT(MultFakeUpload * AddFakeUpload)
I think it would be very difficult to detect that the number sent is fake (except if really unreasonable ranges are chosen), at least (and probably more) difficult anyway than each 2 previous methods, and moreover, in each case where an upload is not possible, the MixedFakeUpload sent to the tracker would be 0, which is satisfying.
I do have a couple of questions. I kind of a virgin with this cool mod. :D
1. Do I need to launch uSerenity.exe or uTorrent.exe?
2. Can I still use RM with memory reader?
3. I'm confused about this one, when do I know if a torrent is using the "default" or "normal" settings?
4. If I create a new label in uSerenity Profiles say "TL", would all torrents having "TL" in their label would use the profile I just made (Example: "TL", "MyTL", "TLMine")?
5. And lastly, is this really an undetectable mod? If I don't want to cheat on SCC and made an "SCC" label with all settings unchecked, will uSerenity be detected?
Sorry, but I'm just excited to try out this mod. :D Thank you!
I do have a couple of questions. I kind of a virgin with this cool mod. :D
1. Do I need to launch uSerenity.exe or uTorrent.exe?
2. Can I still use RM with memory reader?
3. I'm confused about this one, when do I know if a torrent is using the "default" or "normal" settings?
4. If I create a new label in uSerenity Profiles say "TL", would all torrents having "TL" in their label would use the profile I just made (Example: "TL", "MyTL", "TLMine")?
5. And lastly, is this really an undetectable mod? If I don't want to cheat on SCC and made an "SCC" label with all settings unchecked, will uSerenity be detected?
Sorry, but I'm just excited to try out this mod. :D Thank you!
1. uSerenity.exe
2. Yes
3. You see the label at the left side of uTorrent/uSerenity.
4. Yes
5. No, it won't be detected. The mod in itself isn't detectable. Depends on what settings you use, like RM.
2. Yes
Though I've come to the understanding that this generally isn't what you want to do. I'm not sure if uSerenity is the exception to the rule but it most likely isn't.
3. You see the label at the left side of uTorrent/uSerenity.
I'm still confused? Let's say I made a "SCC" label in serenity settings, should it appear in uTorrent automatically? Because if it works like that, I think there's something wrong with my setup. :/
Though I've come to the understanding that this generally isn't what you want to do. I'm not sure if uSerenity is the exception to the rule but it most likely isn't.
Why not?
I'm still confused? Let's say I made a "SCC" label in serenity settings, should it appear in uTorrent automatically? Because if it works like that, I think there's something wrong with my setup. :/
No. It should only be in uSerenity.
Hmm. So how can I see if my setup is working or not?
1. Do I need to launch uSerenity.exe or uTorrent.exe?
2. Can I still use RM with memory reader?
3. I'm confused about this one, when do I know if a torrent is using the "default" or "normal" settings?
4. If I create a new label in uSerenity Profiles say "TL", would all torrents having "TL" in their label would use the profile I just made (Example: "TL", "MyTL", "TLMine")?
5. And lastly, is this really an undetectable mod? If I don't want to cheat on SCC and made an "SCC" label with all settings unchecked, will uSerenity be detected?
1. uSerenity.exe, of course
2. yes, it's OK with this mod, as it doesn't change the announce structure
3. default means no label
4. yes
5. yes
So how can I see if my setup is working or not?
If you've chosen fake upload as an option, you should see it increase under the "Uploaded" column for that torrent, in uTorrent.
Otherwise, just check the tracker. If you've chosen "be seeder" and you're shown as seeding, then it's working. A screenshot of your settings would be good.
1. uSerenity.exe, of course
The reason I asked this is because the first time I downloaded uSerenity, I opened it without closing my unmodded uT and somehow the utorrent.exe had I blue icon instead of the green one.
If you've chosen fake upload as an option, you should see it increase under the "Uploaded" column for that torrent, in uTorrent.
Otherwise, just check the tracker. If you've chosen "be seeder" and you're shown as seeding, then it's working. A screenshot of your settings would be good.
Thanks! I think I get it now. This mod is a dream come true. :D
hi guys :)
i'm starting now to play with userenity on all trackers with many profiles i've created
i need some advice ofcourse to be safe and not do somethink that can kicked me out of a tracker.
1) i've created a "Stealth" profile for: download a file from tracker but no one can see me in the peerlist or i've up&down somethink.
here take a look and tell me if i'm right. do i need to check "Connect Tracker Just Once On Start To Grap Peers"? is it safe?
http://img15.imageshack.us/img15/3320/88739239.png
----------------------- ----------------------- ------------------------
2) "Seeder" Profile: I want to download files but i want to be like a seeder to the tracker and do upload... is these settings right?
http://img821.imageshack.us/img821/4334/37137644.png
i'm waiting for your answer :D thnks in advance
1. that'd be good, or have a look here:
http://www.sb-innovation.de/showthread.php?threadid=9434
2. looks good.
ow sorry :/
i fixed the first image
what do u think ?
Should tick one of the first two. Probably the second one, although that will show you as 0% done - always.
Should tick one of the first two. Probably the second one, although that will show you as 0% done - always.
so is it possible not to show me in the tracker even with O%? either my name there?
so is it possible not to show me in the tracker even with O%? either my name there?
*points at the link I gave above*
*points at the link I gave above*
yes but they can see me in the first time i connect. maybe i'm asking too much :D
Edit: i want to be all stealthy
You didn't read the link completely :wwink:
ok somethink else
i searched everywhere but i can't understand when Owyn said in Instruction for Installation:
-Check about page in uTorrent Serenity to see if it is loaded ^_^
i check but nothing appears there about the label
http://img89.imageshack.us/img89/1055/60712064.jpg
am i wrong?
Edit: man maybe you've been tired with me a litle :P
excuse me but i'm a big noob and i'm learning :D
i appreciate your help...
if it wasn't u no one would help me here ;)
I think it's installed right because the Owyn's message is shown.
If I have multiplier and fake upload checked, will the value I set in fake upload be multiplied by the value I set in multiplier? Thanks!
I think it's installed right because the Owyn's message is shown.
If I have multiplier and fake upload checked, will the value I set in fake upload be multiplied by the value I set in multiplier? Thanks!
That's my understanding, yes.
http://img15.imageshack.us/img15/3320/88739239.png
that gonna get you banned cuz you don't download anything but your "done status" goes up and up from 0% to 100% :biggrin:
that gonna get you banned cuz you don't download anything but your "done status" goes up and up from 0% to 100% :biggrin:
so as Anon say i need to check "be leecher" and i'm ok i think.
but how is possible to build stats if i don't report download,upload, corrupt and completed torrents?
my stats will remain to zero if i'm right
anyway i'm working with low profile on all trackers i need.
How does the 20 torrents limit work? If I have a "Fake" profile in settings and have 25 torrents in uSerenity with a "Fake" label, will the other 5 torrents be ignored even if they are not all active (not all of them are actually seeding)? Also, if I have a label named "Others" in uSerenity but don't have that profile in settings, will they use the "Default" profile?
but how is possible to build stats if i don't report download,upload, corrupt and completed torrents?
my stats will remain to zero if i'm right
Very good! :wclap:
I think that what you need to do for your stats to change is common sense. :wgrin:
Needs some changing. Insteading of ticking "Be Leecher", you tick "Be Seeder". Also, untick "No report Upload"
How does the 20 torrents limit work? If I have a "Fake" profile in settings and have 25 torrents in uSerenity with a "Fake" label, will the other 5 torrents be ignored even if they are not all active (not all of them are actually seeding)? Also, if I have a label named "Others" in uSerenity but don't have that profile in settings, will they use the "Default" profile?
there is no 20 torrents limit.
Needs some changing. Insteading of ticking "Be Leecher", you tick "Be Seeder". Also, untick "No report Upload"
i'm confused a little :/
so the reason i want to be a leecher is that i don't want to be seen in the tracker that i have the contents 100% or downloaded somethink.
i want to be seen there like i didn't download anythink and continue to not download (and ofcourse to not upload also) . So may i have problems with those settings in my screenshot? (+ be leecher )
i want to be seen there like i didn't download anythink and continue to not download (and ofcourse to not upload also) .
Just tick "be leecher" and all the "don't report X" settings, then... though that may be suspicious.
Just tick "be leecher" and all the "don't report X" settings, then... though that may be suspicious.
no send completed event is also necessary :P
if you say like "'i didn't download anything' but then ooops 'thx guys i completed downloading everything' - that's what i call suspicious :D
no send completed event is also necessary :P
Totally right! I always tell people to tick that one, also, forgot it yesterday. :gsmile:
Just tick "be leecher" and all the "don't report X" settings, then... though that may be suspicious.
maybe i can be suspicious but if i check "connect tracker..."
http://img259.imageshack.us/img259/539/43428851.jpg
is better i think to be stealthy to the tracker, right?
maybe i can be suspicious but if i check "connect tracker..."
Good idea...
It's almost the same as ghostleeching, which I've already suggested a few times...
I am a bit confused with usage.
I see it like this:
Run uSerenity.exe it will load Default profile automatically.
If I want to use something different i need to Run uSerenity Settings.exe and load profile while uSerenity.exe is running.
Right?
If I want to use something different i need to Run uSerenity Settings.exe and load profile while uSerenity.exe is running.
Nope, just create a profile in the manager, save it, load uSerenity, and use torrent labels to activate that profile. It's all here:
http://www.sb-innovation.de/showthread.php?threadid=22032
label - you mean prefix or suffix word in .torrent file name?
Right-click a torrent -> Label -> New Label. As long as the profile's full name is written somewhere on the label, it will come into effect for the labeled torrents. :happy:
Never used that "Label" option before. It should be clearly explained in main post that it is uTorrent label option. Please move our conversation to uSerenity settings with description if you may.
5 cent question what if two profile names or more are used?
This is like for me is missing in uSerenity settings with description:
When you run uSerenity.exe Default profile setting is loaded.
I you would like to use other profile on desired torrent file
Right-click on a torrent you desire to cheat on -> Label -> New Label Put cheating profile name here (case insensitive) to cheat torrent by the profile configuration.
Empty label or label without any profile name means that Default profile is used.
Made an addendum to the first post with what you said, can't comment on this though:
5 cent question what if two profile names or more are used?
You'll have to wait for Owyn to answer that :gsmile:
Small fix to make it even more idiocy proof.
You need to run uSerenity Settings.exe and create/save profiles before running uSerenity.exe in order for uSerenity.exe to work properly.
Running uSerenity Settings.exe File -> Save will create serenity_settings.cfg with Default and Normal profile.
You may create custom profiles with custom names if you desire. You may edit existing profiles. Afterwards File -> Save will save your custom setting in serenity_settings.cfg
When you run uSerenity.exe Default profile setting is loaded from serenity_settings.cfg
If you would like to use other profile on desired torrent file
Right-click on a torrent you desire to cheat on -> Label -> New Label -> Put cheating profile name here (case insensitive) to cheat torrent by the profile configuration.
Empty label or label without any profile name means that Default profile is used.
---------- Post added at 21:49 ---------- Previous post was at 21:45 ----------
uSerenity.exe is itself modified utorrent.exe file. So you do not need another client executable file.
Could you please post screenshots of your profiles? I could really need some inspiration on making new profiles, but am quite scared of screwing something up and getting banned.
Cheers.
Could you please post screenshots of your profiles? I could really need some inspiration on making new profiles
Nope, it doesn't work that way. Read our threads, learn stuff by yourself, and make your own profile.
Could you please post screenshots of your profiles?
Please read the whole thread and use search. Please also read this: http://www.sb-innovation.de/showthread.php?threadid=22032
Thank you in advance.
Please read the whole thread and use search. Please also read this: http://www.sb-innovation.de/showthread.php?threadid=22032
Thank you in advance.
Ehh..
Firstly, why would you link to the same thread I posted in? Naturally I read the entire thread and there was only one (http://www.sb-innovation.de/showthread.php?threadid=22032index5.html#post23512 4) (or kinda two (http://www.sb-innovation.de/showthread.php?threadid=22032index4.html#post23152 3)) other post(s) which talked about different profiles (where one of the suggested profiles will result in a ban).
Secondly, I don't understand why there aren't given examples in the OP and the hostility when I ask for some. Using the wrong settings can easily lead to a ban, which so easily could be avoided with examples.
Long story short: I didn't post the request due to laziness, but rather to see the possibilities with the plugin and avoid getting banned because of trial-and-error.
Secondly, I don't understand why there aren't given examples in the OP and the hostility when I ask for some.
No one is being hostile here. If you use the same settings as others, you may get banned if the tracker's staff is reading this, because they only have to look for people faking at X kB/s, for example.
It's better if you make an account on a test tracker and experiment there.
BBB, I have seen requests for pre-set userenity profiles on several forums. It was discussed and most of the people agreed that it's not a good thing to do.
There are several reasons behind that. If somebody wants to use a 'ready to go tool' - there are leecher packs around. In userenity people create profiles that will help to achieve their goals. A profile that I am using successfully may result in instant ban for somebody else, depending on a tracker, etc.
This thread is to help people get better understanding of userenity settings and to help them in selecting the right options depending on their needs.
pre-set userenity profiles
they are already pre-set profiles, "default" for stealthy downloading and "normal"
if the serenity_settings.cfg is not present uSerenity.exe will behave as a normal uTorrent
it will not, it gonna has same profiles which you have by start - "default" and "normal" where default is stealthy downloading
if the serenity_settings.cfg is not present uSerenity.exe will behave as a normal uTorrent
it will not, it gonna has same profiles which you have by start - "default" and "normal" where default is stealthy downloading
Somehow i seem to be unable to create the serenity_settings.cfg . I used uSerenity Settings.exe to create profiles, saved and loaded them in the "File" menu.
All i got is the uSerenity.dll
ps.: Hi to all! I'm new, and i already like this forum. Very streamlined topics and responses. n1
Somehow i seem to be unable to create the serenity_settings.cfg . I used uSerenity Settings.exe to create profiles, saved and loaded them in the "File" menu.
All i got is the uSerenity.dll
I think the config file is saved on %appdata%\uTorrent if you aren't using a portable installation.
I just downloaded the userenity files again, got rid of all my settings and now it works.
I don't now if this was the key to my problem, but when i searched for the serenity_settings.cfg , it turned up in the exact location you mentioned.
Thanks!
it is possible to select the real upload speed to 1 kbs [ or No Upload ] and them fake the upload speed 70 to 130 kbs ????
this is a bit confusing ...
Sure. As far as I know, real upload won't be added to the fake upload unless you tick that option.
Unregistered
11.11.10, 22:53
What if I want to fake-upload only one of my active torrents?
I want the other torrents working regularly - faking nothing.
what do i have to (un)tick on settings manager?
THANKS.
Just create a profile with fake upload, and label only that torrent you want to cheat on with its name.
A question.
The instructions are not clear to me.
I did everything correct I think. but when it launches from the exe file it goes right into my existing utorrent 2.04 so when I click on about for the model it's has what I have been running not this build is that fine?
Question 2 I cannot check both seeder and leecher it toggles back and fort can only check one so if that's right what do I check?
also the same thing happens on the upload multiplier and the fake download I can only check one there.I thought I need to put both in the torrent up load range and then put in the fake.
last question my typical upload speed tops out at 100kps so without getting greedy what would I fill in these blanks if I wanted a 1.800 to 1
like I set my ratio faker.
thanks alot sorry I'm such a noob but I try to be helpful in other ways.
randy
last question
question 3
Question 2 I cannot check both seeder and leecher it toggles back and fort can only check one so if that's right what do I check?
Nobody can check both, it is just impossible to be a seeder and leecher at the same time. Seeder means you have a 100% downloaded file, in this case what else you need to download? So, can't be leecher. Leecher means you do NOT have a full file, so you can't be a seeder yet.
As for what to check, it depends on your cheating strategy and a tracker.
I did everything correct I think. but when it launches from the exe file it goes right into my existing utorrent 2.04 so when I click on about for the model it's has what I have been running not this build is that fine?
Close your existing uTorrent 2.0.4 first.
Question 2 I cannot check both seeder and leecher it toggles back and fort can only check one so if that's right what do I check?
Of course you can't, it's not possible to be a seeder and a leecher at the same time. That's like wanting hot ice.
also the same thing happens on the upload multiplier and the fake download
Fake download? :huh:
last question my typical upload speed tops out at 100kps so without getting greedy what would I fill in these blanks if I wanted a 1.800 to 1
Use search for that, you won't get help if the question has already been answered many times in the past, and you don't even tell us which tracker you're talking about.
After finishing read :
ticking connect tracker just once is enough for Ghost leech right?
Yes. May want to stop the torrent after you're done leeching.
"dont report completed event" What is this for? Why would i want to report to the torrent that i havent completed if i mark dont report upload and download? If i report completed event and dont report download --> Automatic ban more or less isnt it?
There is a possibility that you've downloaded from another tracker (or copied from your friend's PC) and just want to seed it at this tracker. 'Completed event' is a message to a tracker that you do have 100% completed and you are seeder now.
What is this for? Why would i want to report to the torrent that i havent completed if i mark dont report upload and download?
If you're downloading, then: common sense.
If i report completed event and dont report download --> Automatic ban more or less isnt it?
Not automatic, but do expect to be disabled if the tracker has good scripts.
Resurrection
07.01.11, 05:19
@ Comrade Owyn
Hey I have a profile where I don't want to download anything just appear as seeder...Sort of like faking upload after putting 100% completed in RM...
I have ticked the Be Seeder option
When I load my torrent in serenity the torrent starts downloading...I don't want to download anything.
Can you suggest what I need to do?
Untick all files in the Add window before you add the torrent.
By the way, make sure you've also ticked "no report download", "no report corrupt" and "don't announce completed event" for that profile.
Resurrection
07.01.11, 05:22
Oh hai Owyn...
Changed your name and avatar?
Resurrection
07.01.11, 05:29
I want to fake upload ...I know for a fact the torrent has 6 leechers
So in the settings manager I have ticked FAKE UPLOAD if there is atleast 1 peers connected but I can see I'm not connected to anybody...
I have configured speeds between 0 and 999 kbs
ATM the tracker is showing that I'm not uploading anything...I'd like to know if I am...
So in the settings manager I have ticked FAKE UPLOAD if there is atleast 1 peers connected but I can see I'm not connected to anybody...
Logic would dictate you aren't faking upload, then.
However, Serenity is provided as is, and comes with no guarantee of following real life logic. Use it at your own risk. :lol:
Resurrection
07.01.11, 05:36
Use it at your own risk. :lol:
:lool:
:wmellow:
---------- Post added at 06:36 ---------- Previous post was at 06:35 ----------
What if i change it from 1 to 0?
What if i change it from 1 to 0?
Then you always fake upload.
Resurrection
07.01.11, 05:50
Then you always fake upload.
Oh yes...Got it to work...
What an amazing software...
I noticed the fake upload is shown in the UPLOADED column of serenity....
Ok the only drawback I see is that it doesn't have START STOP like RM does...or does it?
Ok the only drawback I see is that it doesn't have START STOP like RM does...or does it?
You can work around that by creating a duplicate of your profile, just without fake upload, and labeling the torrent with its name to "stop".
Resurrection
07.01.11, 05:56
Ahh very crafty...Don't I have to restart serenity for that though?Or does changing of labels on the fly work?
-------
BTW,
No support over PM! Your message will be IGNORED!
You don't bend these rules?
Ahh very crafty...Don't I have to restart serenity for that though?Or does changing of labels on the fly work?
I think doing it on the fly worked, but if you want you can wait for the real Owyn instead of his postcount whore copycat. :gninja:
BTW,
You don't bend these rules?
You'd really like that, wouldn't you? :shifty:
Resurrection
07.01.11, 06:04
You'd really like that, wouldn't you? :shifty:
Cmon it was a simple request for help on an article you wrote...Why not?
--------
You aren't sure of the 'on-the-fly labels change' thing?
Cmon it was a simple request for help on an article you wrote...Why not?
It's either because I'm an asshole, or I want people to use the public forums to ask questions so that everyone can benefit (and in your case, those questions have already been answered in the past). You can pick more than one option!
You aren't sure of the 'on-the-fly labels change' thing?
Not 100%. More like 90 or something.
Resurrection
07.01.11, 06:10
You can pick more than one option!
No its OK...I have picked an option...
----
BTW @others if you tried changing labels without restarting serenity please reply here about your experiences...
I love this mod, sayonara RM.. now I have everything I need in a torrent client, so nice!
Are there some advices ( some option to tick ) to be more secure when faking upload? ( the only option i'm using )
Thanks
Are there some advices ( some option to tick ) to be more secure when faking upload?
Use your head and pick the right torrent and speeds. That goes a long way. Setting "if there is at least X peers connected" above zero may also help.
Okay anon, I did that, thanks.
Now i've got another problem, faking upload was working when I used the Default settings ( no label ) but I created a new setting named FakeNormal and saved, ran µSerenity and created a label named FakeNormal and I put in torrents I want to fake, then I closed and opened again but it's not working... my upload speed is normal ( I am connected to 25 peers and I set a minimal peers number of 15 ). Where is the problem ?
Resurrection
08.01.11, 15:51
You can work around that by creating a duplicate of your profile, just without fake upload, and labeling the torrent with its name to "stop".
Tested changing labels without restarting serenity...Doesn't work...
Can you think of anything else?
---------- Post added at 16:51 ---------- Previous post was at 13:12 ----------
TRIAL AND ERROR UPDATE:
It does work...Changing labels without restarting does work..You just have to start/stop torrents...
Very simple...Very cool...
my upload speed is normal ( I am connected to 25 peers and I set a minimal peers number of 15 ).
Your upload speed is normal where? Can you show a screen of the new profile's settings?
created a new setting named FakeNormal and saved
The profile name or part thereof in label is used inserenity.
The normal profile is being used in your case .
Name the new profile fakenormel or fakenorml.
the profile name or part thereof in label is used inserenity.
it is using normal profile .name the new profile fakenormel or fakenorml
I understood the first sentence (a profile's name being present in the label's name is enough), but the second one kind of left me at a loss. He said he named the profile and label the same, so I guess it's a yes...
you said :
-Be seeder:
Your “left to download” stat is always reported to tracker as 0%. *So that says you already have everything.
-Be leecher:
Your “left to download” stat is always reported to tracker as 100%. *So that says you didn’t download anything.
I think it's the opposite ..
I think it's the opposite ..
Why? Looks correct to me.
A seeder has 0% left to download, and a leecher has 100% to download.
you said :
I think it's the opposite ..
Nope. It says left to download. So in case 1, it's 100% minus zero, so you appear as seeder. And in case 2, it's 100% minus 100%, so you appear as leecher.
thanks ... can you tell me what the relationship between Upload Multiplier & Fake Upload , and how many i shall put on Upload Multiplier ?
thanks ... can you tell me what the relationship between Upload Multiplier & Fake Upload
Sure: you can only choose one of them.
I'm not sure and how many i shall put on Upload Multiplier ?
Depends on the tracker, please read its respective cheating thread to know. Thanks.
I quit to use your mod of vuze because uSerenity uses ram not large as Azureus.
Upload is limited to 5Kb/s on uSerenity.
http://img10.imageshack.us/img10/8536/noname4a.th.png (http://img10.imageshack.us/i/noname4a.png/)
Shall i catch with these settings on big trackers
Read their respective threads and find out.
For the no-report download, does it say "downloaded: 0" or just no download?
i am trying to get 100 snatches on a tracker so if i turn off no-report download, be seeder, then add a torrent then delete, will it count as a snatch?
For the no-report download, does it say "downloaded: 0" or just no download?
That's one and the same.
i am trying to get 100 snatches on a tracker so if i turn off no-report download, be seeder, then add a torrent then delete, will it count as a snatch?
No. Snatching is completing the torrent.
DHT-Patch: (always on by default)
Ignores the private flag, so DHT and Peer Exchange is enabled for ANY new torrent. – so you can get more peers and sends on your torrents
DHT-Patch doesn`t work on OLD torrents,right? Because it says `it isn`t allowed to use DHT` on program
DHT-Patch doesn`t work on OLD torrents,right? Because it says `it isn`t allowed to use DHT` on program
as you can see it works for torrents added in uSerenity run.
What settings is advisable for faking bonus points in trackers like PTM and PTP? I want to appear as if I'm cross seeding something I have already downloaded elsewhere. Currently, I have ticked the options below.
- be seeder
- no report download
- no report upload
- no report corrupt
- don't announce completed
I saw those setting somewhere in the forums and I just want to verify if those settings are correct?
They're correct as far as I can see. Obviously, untick all files when you add the torrent (or else they will download regardless of your settings), but I think you already knew that. :gsmile:
Yes, I did that. :D What confused me was the "don't announce completed". I thought that that should occur if a torrent gets completed, cross seeded or not.
What confused me was the "don't announce completed". I thought that that should occur if a torrent gets completed, cross seeded or not.
That's just ticked for common sense's sake (can't complete a torrent if you were seeding it), but it's indeed impossible to send the completed flag if you've unticked all files.
-Be leecher:
Your “left to download” stat is always reported to tracker as 100%. *So that says you didn’t download anything.
In what kind of situation is this useful? I explain, say to the torrent you have all to dowload you have nothing to share (to upload) and you dont download...so...maybe for staying with the torrent with 0 ratio but getting bonus for being seeding? A little suspicious to have 0 of a torrent that have for example 50 seeders if you are 12 hours torrenting. Thank you in advance
maybe for staying with the torrent with 0 ratio but getting bonus for being seeding?
No.
I've explained it several times, I suggest you search this thread.
Ok, I have read, so this is useful in case of packs or bigger archives, just to download it without having to be seeding hours after hours.
If I click on "conect tracker on start to grab peers" which i have read is recommendable, I would appear in their peerlist for 1-2 hours then dissappear, isn't it? So that is the most vulnerable part, those 2 hours. This leecher thing gives me the impression of being too risky
If I click on "conect tracker on start to grab peers" which i have read is recommendable, I would appear in their peerlist for 1-2 hours then dissappear, isn't it? So that is the most vulnerable part, those 2 hours. This leecher thing gives me the impression of being too risky
I've explained that one as well :wwink:
http://www.scroogle.org/cgi-bin/nbbw.cgi?Gw=%22to+grab+peers%22+site:sb-innovation.de
This is not reporting fake upload for me to TL (it's the only tracker I use).
What am I doing wrong?
http://i.imgur.com/S4dCb.jpg
Using decimals? Not putting your TL torrents in the right label?
I got rid of the decimals (using single digits), saved, closed Usernity, reopened, downloaded a small torrent but it still isn't reporting. I do not use labels.
Thanks for the quick response.
Brent.M, you can allways use debug version with logging cooming with every release to see what is done and what is not and why.
I got rid of the decimals (using single digits), saved, closed Usernity, reopened, downloaded a small torrent but it still isn't reporting. I do not use labels.
Thanks for the quick response.
How about that insane slow speed? 1 KB per second? This way you will upload 1 GB in like a week. Try 40-50 KB at least.
I'm a f**king idiot!
No you're not, you just made a small mistake. Big deal... It's not like we haven't done something similar...
I'm a f**king idiot!
Why? Did you get banned or something?
By all means, Mihai is right... people (me included) have probably done worse things.
And if you get banned at TL, a quick $50 donation can resurrect your account, in case you love it that much...
Hey there, I've got a little problem since I came back to serenity which I haven't used for a while.
I use it on BakaBT, trying to fake an upload.
So I closed uSerenity, created a new label name Bakabt and made fake upload between 400 and 600 kb/s for at least 6 Leechers connected.
I saved, opened serenity, created the label and gave it to a torrent I had downloaded before.
But when I start to seed ( and there are 16 leechers ) , it doesn't fake...
what am I doing wrong ?: /
there are 16 leechers
at least 6 Leechers connected
because requirement isn't met.
"Connected" is the keyword here. Reduce the minimum amount of connections or set it to zero.
So...I am just using this setup solely on TL:http://i.imgur.com/ul9bL.jpg
What do you guys suggest?
What do you guys suggest?
Reading and posting on the TL thread.
Would any of these options allow me to show that I've downloaded the torrent (be on snatch list) without actually downloading them?
The torrents are on freeleech...
I know I can use RM to fake download etc, I was hoping to find somehow easier...
Thanks
Would any of these options allow me to show that I've downloaded the torrent (be on snatch list) without actually downloading them?
No.
Fake download is a pretty popular request, actually.
Resurrection
29.06.11, 04:47
no.
Fake download is a pretty popular request, actually.
btn !
btn !
btn ? what do you mean?
I really just want to show more torrents on the snatchlist, I don't care about showing downloaded data...
Since I created two profiles/labels with similar names ("FEJK" and "LITE FEJK") nothing seems to be working, even after removing one of them. Is there any way to remove the entire program, or perhaps just the file with the profiles in, to install it fresh? Just replacing the two .exe's and the .dll does not clear my old profile.
two profiles/labels with similar names ("FEJK" and "LITE FEJK")
the one which was created first (above another in manager) would be used. or you can place "LITE FEJK" above in setting manager so in uSerenity you could use both labels freely with according actions taken for them.
don't forget to click "save" after deleting unwanted profile in manager. and you can use debug version with loggong any time you want to see what is happening and what is not.
Just replacing the two .exe's and the .dll does not clear my old profile.
If you're not using a portable install, then you must kill serenity_settings.cfg in %appdata%\uTorrent.
If it's the fake upload speed you want to see in the client, that's not possible.
Damn! I was just moving to uSerenity, rather than VEM thinking this would work, making me rather happy as I couldn't get VEM to show fake uploads in the web remote... Really wish it would add in the upload column as well :( How on earth can you even decently follow what you've uploaded? Especially on trackers that tend to be slow on updating their sites!
How on earth can you even decently follow what you've uploaded?
The value under the "uploaded" column will increase as if you were uploading for real. That way you can know how much you've faked.
The value under the "uploaded" column will increase as if you were uploading for real. That way you can know how much you've faked.
Your note I quoted said it didn't. I had just downloaded something small to test it with, and it was sticking to 8mb upload for ages so I decided to come check here again. Then I saw what you said about not seeing it. Has this changed since page 4, then :P?
You got me confused now. :lol:
It should be like I said if you're using a recent version. That's official (i.e. Owyn said it) as far as I know.
I downloaded the latest version, but I'm not seeing any changes in my total upload? I'll turn it on again and report back later.
How often does it update?
edit: Seems like I misread your quote. It's true that you can't see the speed. ^^ Sorry about that. Weird that upload total isn't doing much for me either.
edit2: Suddenly it's working. And working well, not sure why it wasn't doing anything, but after restarting it a couple of times and resaving stuff, everything is fine. Weird!
---------- Post added 13.07.11 at 07:01 ---------- Previous post was 12.07.11 at 20:34 ----------
Anyone know of a way to automize the labels?
In VEM, I use autocategory to set labels depending on the trackers a torrent uses. This would be super useful combined with uSerenity, imho. But I don't think it's possible yet :(
Resurrection
13.07.11, 07:05
Anyone know of a way to automize the labels?
In VEM, I use autocategory to set labels depending on the trackers a torrent uses. This would be super useful combined with uSerenity, imho. But I don't think it's possible yet :(
No, there isn't one.
No, there isn't one.
I've been searching for plugins or something, nothing useful so far :(
For uS, can one use Microsoft Visual C++ 2010 SP1 Redistributable Package as opposed to 2008?
For uS, can one use Microsoft Visual C++ 2010 SP1 Redistributable Package as opposed to 2008?
Try it and see :)
Try it and see :)
And ruin my system? :gcry:
It doesn't work using 2010.
I got banned on IPT recently. I updated my client to the latest version (2.2.1) and I believe I set everything right just like that old version but a few days later I get a PM from an admin saying I was uploading at over 10MB/s (which is ridiculous). I have only been using the upload multiplier to 2-3x my upload and that's it.
There is a possibility that I entered a wrong number somewhere, but seriously, how the f**k did I upload at insane speeds there. Since then I downgraded my serenity to old version and testing the multiplier on other trackers before I get a new IPT invite.
well, after 2.2.0 Build 24402 upload multiplier should work just fine and it was tested many times by many people already, it would be very usefull if you could test settings which got you banned on some open tracker torrent with logging enabled to see what is going on (debug dll)
I am totally baffled why I had such upload speeds. Maybe something got bugged when I was getting a few BSOD on my PC or similar. I think I was very unlucky with it, but I would really like to know what was the cause (I like to learn from mistakes).
I am totally baffled why I had such upload speeds. Maybe something got bugged when I was getting a few BSOD on my PC or similar. I think I was very unlucky with it, but I would really like to know what was the cause (I like to learn from mistakes).
well then in program's folder replace uSerenity.dll with one from Debug folder whichi makes text log file in uSerenity folder so you can see everything which is done and do what you was doing on banned tracker but now on some open tracker without registration or one which doesn't ban for cheating and see logs either yourself or send it to me via private message if you found something suspicious or you aren't sure about it so i can check it.
+You might want to check it for torrents you used on your banned tracker.
a few BSOD on my PC
well, looks like we have a winner.
In next release i already remade whole fakeupload and multiupload system but in previous one (current last released) if program was terminated incorrectly and data about your upload wasn't sent to tracker before program shutdown it might have travelled to next uTorrent run and it was multiplied there, whole uploaded value.
:(
Oh btw, does having more than 1 announce URL in a torrent file help the tracker protect from multiplier/fakeupload cheating?
does having more than 1 announce URL in a torrent file help the tracker protect from multiplier/fakeupload cheating?
well it complicates the job for it but uSerenity was made to support torrents with multiple trackers in it correctly.
Great thanks.
One last question, just in case I get a BSOD again while running Serenity, what should I do if I don't want the program to send any upload data to the tracker at all? (just to be safe) Is there any file I can delete or whatever?
Great thanks.
One last question, just in case I get a BSOD again while running Serenity, what should I do if I don't want the program to send any upload data to the tracker at all? (just to be safe) Is there any file I can delete or whatever?
well, you could:
- edit label in Settings Manager before opening uSerenity not to have upload multiplier it would upload unmultiplied (may be less than last time reported - but admins usually don't check this suspicios situation)
- turn off the internet and the open uSerenity and stop all torrents then close it, turn on the internet and open uSerenity (not sure, it still may send everything due to its failure-proof system, need checking)
- edit your hosts file to associate tracker address to your local ip 127.0.0.1 and start up a local tracker server so uSerenity would get answer from it and think everything is reported ok lol.
So I read the previous 13 pages and couldn't figure the answer for my question ...
How are the partitial seeders handled ?
Because I got a set up with the requirement that 2 peers must be connected to start faking up ... and I am connected to 8 peers, but all are partitial seeders or have 0% done.
So it is not uploading ... ?!
But with the same label, on the same tracker I have another torrent, where actual leechers are connected an look at that, i am fake uploading !!!
So I was wondering if it was just a bug or actual distinguishs the peers between partitial seeders and leechers (which would be incredible and awesome)
edit: Oh and the situation takes place when actively downloading and with no other options checked but fake up.
douche99, uSerenity just reads "number of connected pears" from uTorrent memory itself, question is how _uTorrent_ consider those partial seeders
I am connected to 8 peers, but all are partitial seeders or have 0% done.
So it is not uploading
earlier an opinion was told that only peers currently in transfer with you considered currently connected.
you may want to test this qustion and see yourself
_SoulCrusheR
31.08.11, 21:26
earlier an opinion was told that only peers currently in transfer with you considered currently connected.
But will it be any soon? :P
But will it be any soon? :P
who ?
read somewhere (probably in Mihai's post) that you can only fake on 20 torrents. is this true? if yes, I am curious to know the reason.
The Shutter
01.09.11, 02:07
no you can cheat on any number of torrents ;)
That limit is looooong gone.
Well, seems in fact that the peers are categorized in active downloading peers and partitial seeders. Because when I snatched the file, and was downloading from the partitial seeders ... therefor was fully connected, it did no fake upload.
But just seeding or downloading while fully connected to a downloading peer, it faked upload... :top:
This makes things way easier and save :klatsch_3:
Oh and the downloading peers did not download from me ... they did from someone else but the average download rate was probably send, leting the program know its a legit peer.
@douche99 are you sure about the categorization between active downloaders and partial seeders? because I thought that anyone who appeared the in "peers" tab of uTorrent was a peer according to uSerenity. And those who have 100% (seeders or partial seeders) also appear in that list.
so new release is ready (2.2.1 uT) and when Anon comes online he'd update the release thread ( i hope he would ^_^ )
- now debug version won't crash and now it buffers output to the log and writes it after any tracker update occurs
- free safe changing of all labels on the fly:
if you switch from multi to non-multi - it would keep uploaded value safe but won't multiply amount of uploaded after last tracker update
if you switch from fakeupload with not adding real upload option enabled - it would remove amount of real uploaded from the last tracker update at that moment
if fakeupload task isn't active and you switch to fake label while torrent is active you'd have to wait for the 1st tracker update for fakeupload to start working (if any faking is active atm - it is instant)
if you start multi\fake after your comp crashed with a BSOD or anything and your starting uploaded value is not null - it would consider it and add safely without actions on it.
and of course all new things support multi-tracker torrents
feel free to test ^_^ *I did and all was ok atm*
so new release is ready (2.2.1 uT) and when Anon comes online he'd update the release thread ( i hope he would ^_^ )
I just did - please redownload the archive from the Serenity thread, everyone.
-FakeUpload:
Every second after .torrent start random number in the range you choose is added to uploaded stat which will be sent to tracker depend less upload you or not, you can specify minimal amount of peers to be connected to in order to add fake upload
I am afraid if this is what has been implemented, you would end up with a rather constant figure on each announce - the mean of the range. To me the correct method is to generate one random number only for each announce (not one every second). Have I missed anything there?
Hey guys new here and have been reading the forum for a few hours now and trying to get my head around uSerenity which I think I have. Im trying to just fake my upload on TL. So far I have:
Be Seeder: Checked
Be Leecher: Unchecked
No report download: Checked
No report upload: Unchecked
No report corrupt: Checked
Don't announce completed event: Checked
Upload Multiplier: Checked
Between 1.1 and 1.2 X
With this I still want to download torrents but do I have to leave the torrent seeding after the download for it to fake my upload on TL.
Cheers
I am afraid if this is what has been implemented, you would end up with a rather constant figure on each announce - the mean of the range.
I guess that'd depend on the reliability of the RNG.
Hey guys new here and have been reading the forum for a few hours now and trying to get my head around uSerenity which I think I have. Im trying to just fake my upload on TL. So far I have:
We have a thread for TL, might want to check that out.
I guess that'd depend on the reliability of the RNG.
No, it should be a basic math problem. I would be surprised if anyone could really generate random uploads as expected using the current version. Also, I was testing other things today, but as a side observation, I can confirm the upload would always be (very) close to the middle value of the range.
So with full respect, I would like to report this as a bug to Owyn. :)
Well, I'm not a statistician. If mathematically speaking it can be considered a bug... :idunno:
Ive tried posting on the TL thread but no luck. The main thing I want to know is do I need to leave the torrent that I've downloaded seeding or can I stop it and uSerenity will do the rest.
can I stop it and uSerenity will do the rest.
I'm afraid it doesn't work that way.
I can confirm the upload would always be (very) close to the middle value of the range.
If you've found a bug with rand() (http://www.cplusplus.com/reference/clibrary/cstdlib/rand/) you should probably report it to Microsoft... I can do nothing about it except using other third-party heavy algorithms for Random.
To me the correct method is to generate one random number only for each announce (not one every second)
It'd give more disadvantages than anything usefull plus if as you say random gets 'close to the middle' eventually so it would get there eventually for your total reported stat then after few low high or middle for each random announce.
So do I leave the torrent seeding after downloading it to fix my ratio?
So do I leave the torrent seeding after downloading it to fix my ratio?
In most cases, yes. You can stop it once you read your desired ratio. It appears you've merely given your real upload a slight 10-20% increase, so there shouldn't be any trouble there. Just don't use "show as seeder" on pack torrents and you'll be fine.
@Owyn, you don't have to be so defensive, mate. It is a basic mathematical principle.
I bet you have not fully tested it yourself. Why not run it on a torrent for a day and see the results? Actually if you (or anyone else) can show me a real random outcome as expected, I will not say another word at all on this forum. :(
show me a real random outcome as expected
You could use debug dll and then just read logfile to see each and every 'random' number it generated for faking.
defensive
I just wrote my counter-arguments for your arguments, I apologize if you found my words offensive anyhow.
There is nothing wrong with rand(). The problem is you generate thousands of random numbers in the announce interval and sum them up. This would have little random effect at all.
No, I don't feel offensive. I love your software, and just want to make it better!
Actually if you (or anyone else) can show me a real random outcome as expected, I will not say another word at all on this forum. :(
Never refrain from saying what you think, as long as it's on a civil manner, which has been the case here.
Hi all, i want to do something with userenity here is wat and i need to know the way what buton to check
i have 2 packs down in hdd and runing in utorrent now i want to increase ratio to dose torrents the trackers ar cinm..ik & t..t Leechers they are,could i stop the utorrent and run uS on that torrents macke a biger ratio and then come back normaly to seed
How do I set uSerenity
I am new to this area,i hope you do not mind my questions.
i have 2 packs down in hdd and runing in utorrent now i want to increase ratio to dose torrents the trackers ar cinm..ik & t..t Leechers they are
That's not a very good idea, buddy.
Just need a quick help. Ive been seeding all day and when I log onto TL my ratio is still the same. Nothing as changed. Shouldn't it go up a little? Have I done something wrong? Ive followed tutorials and stuff and gathered an understanding of uSerenity as much as I could. Maybe I'm missing something.
Just need a quick help. Ive been seeding all day and when I log onto TL my ratio is still the same. Nothing as changed. Shouldn't it go up a little?
If you've uploaded, certainly.
I must be doing something wrong then. So just to clarify. I have these settings:
Be Seeder: Checked
Be Leecher: Unchecked
No report download: Checked
No report upload: Unchecked
No report corrupt: Checked
Don't announce completed event: Checked
Upload Multiplier: Checked
Between 1.1 and 1.2 X
After I download the torrent and I leave it seeding, these settings should fake my upload right? Therefore giving me a better ratio?
Is that upload multiplier a good start or should I raise it more?
What would be the optimal setting for FakeUpload if I am trying to increase my ratio but not set off any red flags? I read that 6kb/s is the maximum suggested for the SBI leecher pack, does that apply for this mod as well? Thanks.
What would be the optimal setting for FakeUpload if I am trying to increase my ratio but not set off any red flags?
That's tracker-dependent. This (http://www.sb-innovation.de/f229/tracker-cheating-quick-links-19749/) will help.
How do I fake seed 100% something as If I got it from another tracker? Because 'Be Seeder 100%' doesn't work. It still downloads the file.
How do I fake seed 100% something as If I got it from another tracker? Because 'Be Seeder 100%' doesn't work. It still downloads the file.
go to Files tab in uSerenity and select file to "Skip (Don't download this file") - so it won't download the file.
What am I doing wrong as it still doesn't seed?
12539
Disregard the "downloading", the tracker is seeing you as a seeder (or it should be).
Could you possibly show me your settings? It hasn't "seeded" a single kb since you last post. Using mRatio for now.
It hasn't "seeded" a single kb since you last post.
Why should it? You haven't enabled fake upload nor the multiplier for that profile.
Could you possibly show me your settings? It hasn't "seeded" a single kb since you last post. Using mRatio for now.
If you have any troubles, what I recommend is seeing the "uploaded" column of uSerenity.. (in the actual program, this might be turned off, right click and check it to turn it on).. If you are doing it right, the the uploaded column should have increasing numbers every second.
Hello, I used to cheat with RM on TL and got caught 2 days ago, of course I got a new invite and now I'm testing uSerenity.
I have some problems:
1- I dont have the config file, I use uSerenity Settings.exe and set all the options and save them but no config file is created. Is that ok? I only have these 3 files
uSerenity Settings.exe
uSerenity.dll
uSerenity.exe
but no config file.
uSerenity seems to be working at least to download.
2- In the default profile I uncheck everything and only check FAKE UPLOAD and I put the values between 25 and 30 KB and if theres at least 10 peers connected. Is that ok?
Thanks!
1- I dont have the config file, I use uSerenity Settings.exe and set all the options and save them but no config file is created. Is that ok? I only have these 3 files
uSerenity Settings.exe
uSerenity.dll
uSerenity.exe
but no config file.
Have you looked under %appdata%\uTorrent already?
Have you looked under %appdata%\uTorrent already?
Thanks! it was there :)
and what about the settings? are they OK?
For such questions, we have a TL cheating thread.
Unregistered
25.04.12, 03:20
Having difficulty getting the uSerenity features to work. So far, it works just like vanilla uTorrent. I've unzipped it to an arbitrary folder, opened uSerenity Settings and created a profile to just use fake upload (range 20-40 kb/s, min # of peers = 2), saved and closed the settings, opened uSerenity, and applied the appropriate label to the appropriate torrents. No effect. The torrents that interest me are often a bit obscure, leading to few low or non-existent download rates. Still, there are frequently 10-20 peers available, but the upload column remains blank. I also did a search and the .cfg file is in Appdata/Roaming/uTorrent as it's supposed to be. Opened it up in Notepad and all the entries appear to be correct. Suggestions?
PS I tried posting this question on the wordpress site, but for some reason the post would either never be submitted or never show up.
Set required peers to 0 and see if it helps :wink2:
# of CONNECTED peers = 2, it means fake uploading starts only when 2 or more peers are downloading from you
you have 20 available peers but none of them are connected to you
try setting fake speed 10 - 30,
# of connected peers to 1,
and multiplie fake up to 2
add real uploaded to fake uploaded
with this setting when one peer is downloading from you with 5 kB/s, you will report to tracker 5 + (10+30)/2 = 25 kB/s average
when two peers are downloading from you with 10 kB/s (5 each), you will report to tracker 5 + (10+30)/2 * 2 = 45 kB/s average
Having difficulty getting the uSerenity features to work. So far, it works just like vanilla uTorrent. I've unzipped it to an arbitrary folder, opened uSerenity Settings and created a profile to just use fake upload (range 20-40 kb/s, min # of peers = 2), saved and closed the settings, opened uSerenity, and applied the appropriate label to the appropriate torrents. No effect. The torrents that interest me are often a bit obscure, leading to few low or non-existent download rates. Still, there are frequently 10-20 peers available, but the upload column remains blank. I also did a search and the .cfg file is in Appdata/Roaming/uTorrent as it's supposed to be. Opened it up in Notepad and all the entries appear to be correct. Suggestions?
PS I tried posting this question on the wordpress site, but for some reason the post would either never be submitted or never show up.
Hi all,
Lurker reporting in! First, Thanks to all of you for helping us shit-net types out - the staggering amount of patient posts I've read from just anon is award worthy. I'm a uSerenity user and so far It's been a wonderful help. However my search skills are either crap today or I'm not finding the right keywords so here's my question and scenario:
How do I fake my download?
Now before you call me mad - To build ratio I'd like to download a torrent that has tons of leechers but some of these torrents are HUUUGE , and I really don't want to actually download them - is there a way for me to fake that ?
If someone could tell me of how to do this with uSerenity I'd really appreciate it (maybe link to a tute or something )?
P.S my apologies for bumping an old thread - let me know where this should go and I'll delete/move as necessary.
How do I fake my download?
Now before you call me mad - To build ratio I'd like to download a torrent that has tons of leechers but some of these torrents are HUUUGE , and I really don't want to actually download them - is there a way for me to fake that ?
Serenity can't do that. For this task, you must use a ratio tool like RatioMaster, mRatio or the one built-in Vuze Extreme Mod.
CerwinVega
19.11.12, 18:25
If i use fake uppload like 100 - 200kb/s and set peer limit to 0.
Then it constantly seed with speed 100 - 200?
Doesnt it seems kinda odd?
If i use fake uppload like 100 - 200kb/s and set peer limit to 0.
Then it constantly seed with speed 100 - 200?
Doesnt it seems kinda odd?
does it really work?
or else i can start getting banned everywhere
CerwinVega
19.11.12, 20:16
does it really work?
or else i can start getting banned everywhere
Well i wonder the same, Thats why i asked is somebody know the answer or i might be stupid :P
If i use fake uppload like 100 - 200kb/s and set peer limit to 0.
Then it constantly seed with speed 100 - 200?
Yeap it would. It could seem pretty odd if you continue doing so when number of peers on a torrent reaches zero and you still be uploading with 100-200kb\s....
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.