View Full Version : Download from Rapidshare.com/No waittime
RSD Free Prem loader v0.5 Tutorial
Download english version (http://www.sb-innovation.de/f107/rsd-0-58a-english-version-3992/)
After I have searched a while for a method like I can download comfortably from rapid share etc. without interrupting constantly the connection and giving the code in the Captcha to recognition, finally, I have found a solution.
Now this is nothing new and the methods are known then to most, but I have put together something what really well functioned without a lot to set. Everything what I have tested before was to be furnished a little bit awkwardly or did not function 100%.
With these tools and the method you can download at the moment to 100% without complicated giving of the Captcha codes or to change the US Downloader.ini etc.
It is already everything furnished and you just need to insert the links and wait to everything is sucked.
While testing i had a recognition of 100% with Rapidshare.com files.
it is a method that you best do when you´re not busy on your PC in the Internet.
But the Reconnect passes so fast that you hardly notice it.
But now let´s come to the point...
First of all we need the tool RS Downloader ( RSD Free Prem loader )
http://i174.photobucket.com/albums/w118/Technokasper/RS_Ansicht_NEU.jpg
At Einstellungen(Settings) "Allgemein" ("General") you set the following
http://i174.photobucket.com/albums/w118/Technokasper/Rapid_Einstellung_Allgemein_NEU.jpg
At "Downloadverzeichnis" you put down then path where the downloads
should be stored.
At „Download über Rapidshare Server„ : There I have selected TeliaSonera, because it is one of the fastest ones at the moment I think
There I download a file on an average with 800 - 900 kb/s.
Every now and then take a look at the speed. If the speed drastically sinks, just try another server
Turbo Reconnect: For fast Reconnect. However, could lead to it, that you don´t get a new IP assigned.
"Dateigrösse beim Hinzufügen prüfen" and "Dateigrösse nach Download prüfen" I would leave DEACTIVATED. You could get a Error Message and
the download won´t start
At "Sonstiges" you can choose yourselves what you like.
At settings "Methods" we give the following:
http://i174.photobucket.com/albums/w118/Technokasper/Methoden-Screen.jpg
With "Captcha Methoden" you select "AntiCaptcha".
In the directory of the RS-Downloader there is a file with the name:
"RSDUpdater.exe".
If you open this one and the connection in your Firewall is allowed, an update of the AntiCaptcha method is done and you always have a current method when rapidshare once again changes the Captchas.
At "Reconnect" we give the path where the Reconnect.exe is stored.
You get current Reconnect.bat and methods of the arrangement here:
Reconnect.bat for Router/collection (http://sb-innovation.de/showthread.php?t=519)
RSD Free Prem loader only works with links of Rapidshare.com
With YouCrypt junior you are able to encode coded links
There are different services which encode the download links of rapid share etc.
Then I always have to do klick myself step by step through, to get to the desired link.
With YouCrypt junior it is possible to shorten these detours and to get the link directly.
For the end once more a special THANK-YOU to
"schneewiesel" the developer of the RSD and to all who helped him to create this awsome tool
Complementary Tutorial to the Router arrangement with RSD and Router Control
Install and start RouterControl
Click on "Router"
There you select your Router and give the IP address of the Router.
Then the user name/Admin and your password which you set in the Router.
Now in the RSD on "Einstellungen"---> "Methoden"---> "Durchsuchen".
Then there you choose the RouterControl.exe from the installed Router Control.
In the end on the right of it in the parametre-text field you give: "/Disconnect/Connect / multinational/Quit"
and do not forget "Speichern" (to safe)
Now the new version supports "CCF"
For all who wants to use RSD furthermore:
You have to delete the RSDUpdate.exe in the program folder RSD or you will get an error message while starting
Then start RSD and switch off the setting for the live Support
Here you can find the latest version of RSD:
RSD english version (http://www.sb-innovation.de/f107/rsd-0-58a-english-version-3992/)
Does anyone know if this still works with the current RS site?
hmm havent tried , today iam gona test this later on ;)
Does anyone know if this still works with the current RS site?
it should still work with Rapishare.com or
do you have any problems with it? :top:
it should still work with Rapishare.com or
do you have any problems with it? :top:
I haven't tried this yet but I kno RapidShare has made some changes in the last few months to prevent waiting times!
Will try this out though, thanks:cool2:
Can anyone confirme it works?
DraconLord
27.02.08, 04:34
Tried this a while back and it didn't work
Tried this a while back and it didn't work
Give the screenshot of the error or tell us what problem so that the Author who shared this trick and tip with us can give you the advice and hope it will work for you :top:
Can anyone confirme it works?
This is 100% working
whats your problem draconlord??
if you download our version it will work
its blocked now :( or i have some issue :/
Yes, doesn't work for me :( Maybe i do some wrong?
Will have to try it, looks a good job.
it doesnt work for me maybe its no work ?
Doesn't work for me either. Although Rapidshare has been messing with its CAPTCHA for the last few weeks so maybe this program just needs to be updated?
Doesn't work for me either. Although Rapidshare has been messing with its CAPTCHA for the last few weeks so maybe this program just needs to be updated?
Doesn't work at the moment, because of the reasons
you mentioned
Rapidshare has changed their captchas often during the last days and
there is no 100% working version temporarily
we will inform you when there is
Worked one time , then stoped .. This soft is soo cool, hope they fix it ... Tnx !!!!
This Versions should work:top:
http://www.sb-innovation.de/showthread.php?threadid=2206
and here
http://www.sb-innovation.de/showthread.php?threadid=3310
where can i get an english version of RSD?
in site thers only the german version
It isnt so hard to use even if you dont speak german. A online translator will do the job. Thanks for the upload :biggrin:
@schizodep
There is no english version.
But i have some translated screenshots for you.
http://www.sb-innovation.de/attachment.php?attachmentid=2946
http://www.sb-innovation.de/attachment.php?attachmentid=2950
http://www.sb-innovation.de/attachment.php?attachmentid=2951
http://www.sb-innovation.de/attachment.php?attachmentid=2952
http://www.sb-innovation.de/attachment.php?attachmentid=2947
http://www.sb-innovation.de/attachment.php?attachmentid=2948
http://www.sb-innovation.de/attachment.php?attachmentid=2949
I hope you can read it and understand what is meaned cause my english isn't all-to good!
Maybe someone could look it over and tell me if I had translated something totally wrong.
sorry if this isn't the right place...
if you aren't behind a router (you -> modem -> net) then this "universal ip switch" batch may also work to change your IP
ipconfig /release
netsh interface IP set address "CONNECTION NAME" static 1.2.3.4 255.0.0.0 1.2.3.5 0
netsh interface IP set address "CONNECTION NAME" dhcp
if you keep on getting the same ip as before, replace 1.2.3.4 and 1.2.3.5 with any unallocated IP range e.g.
netsh interface IP set address "CONNECTION NAME" static 9.8.7.6 255.0.0.0 9.8.7.7 0
also the second invalid ip there has to be different than the first one, and leave 255.0.0.0 untouched, it's the "subnet mask"
i think this works because your comp sends your last valid ip when bootstrapping, therefore that's the one you get when rebooting for example
this changes your ip to 1.2.3.4 (with a subnet mask of 255.0.0.0 so that windows accepts it), then asks for a new one
as "1.2.3.4" isn't within your isp's ip ranges (plus it's invalid) you get a fresh, new ip
* of course replace "CONNECTION NAME" with your conn's name as it appears at "network connections", and keep the quotes!
hope this works for you guys :biggrin:
Well,I was already searching for such a nice tool to override the RS waiting/ip switching time !!! You never failed to amaze me guys & once again you present a handy tool like this one !! Thank you alot my friend & Keep Up the Genious Work 4ever !!! :top:
Love This Spot !! :rolling_eyes:
Reppy
is this stuff actually work now with new capcha?
just buy you a premium account and never get in trouble...
easy exit :tongue: but sometimes for X reason you can't or don't want to :wink:
must try this out, tried every known rapidshare program nothing seems to work for me.:frown:
zatoicchi, you need a downloadmanager for rapidshare?
Just try this one, i tested it and it works with the "new" rapidshare.
Thread (http://www.sb-innovation.de/f107/rsd-0-571-happyhour-fix-3793/)
yes tested and it works :)
here is the new version.
why isn't it written in english?
rsd 0.572 (http://www.sb-innovation.de/f107/rsd-0-572-bugfixes-3863/)
thanks to shoulder.
why isn't it written in english?
there is no english version... in the meantime you can use shoulder's "guide picture" to understand the UI :smile:
why isn't it written in english?
Do you mean my post or the software?
My post is in german cause it is in the german area and it isn't necessary to understand the post to use the software. :wink:
The software is german cause the coder is from Germany.
The software is german cause the coder is from Germany.
the strings are stored as unicode inside the EXE.... and since german is a bit of a "long" language a basic translation could be done...
in other words i'll get right on that when i get home :top: (no tests or homework to do :tongue:)
That sounds great anon. :top:
If you need a helping hand for the translation just let me know. :wink:
the strings are stored as unicode inside the EXE.... and since german is a bit of a "long" language a basic translation could be done...
in other words i'll get right on that when i get home :top: (no tests or homework to do :tongue:)
:klatsch_3:
excellent.
looking forward to it.
...
but i got a question for u.
i didn't get your modem ip change guide.
how do i combine with RSD?
:confused2:
but i got a question for u.
i didn't get your modem ip change guide.
how do i combine with RSD?
:confused2:
the script will only work if you're not behind a router. you need to enable reconnect after every download and use my script as reconnect.bat. use this pic to guide yourself :smile::
http://img165.imageshack.us/img165/2702/portapapeles01ar2.gif
set-up your rsd reconnect settings so that they look like this (C:\reconnect.bat is my script's code -everything inside the "code" field in my original post- saved as a file named that; you can save it anywhere and name it as you wish, just make sure you set the file path accordingly :wink:)
if everything is configurated correctly, rsd should use the script after every download, always waiting until the script has finished running and 5 seconds before the first conn check (make sure you give it those five secs as in the image, just in case your dhcp server is slow :wink:)
and remember this script runs ipconfig /release so it will break any other downloads you may have been doing! :wink:
ok, i think i got it now
i'll try it later though, because i'm dl something right now. :P
...
i see that you've already translated RSD
are you going to upload the translation?
thanks for the help.
ok, i think i got it now
i'll try it later though, because i'm dl something right now. :P
...
i see that you've already translated RSD
are you going to upload the translation?
thanks for the help.
i thnk the translated version will come today:wink::top:
@ anon: Thnx Buddy for doing the translation !! I thought of doing it once I saw that topic but couldnt confirm that coz I didnt have the time for it !! Keep it Up mate :biggrin:
:klatsch_3:
RSD translaed would be perfect.
thanks again.
@ anon: reconnect.bat didn't work for me. :( i come up with another method tho, but for that one i have to turn/switch (?) the modem off (disconnect it). not very unattended.
@ anon: reconnect.bat didn't work for me. :( i come up with another method tho, but for that one i have to turn/switch (?) the modem off (disconnect it). not very unattended.
try again... are you behind a router? have you copied and pasted the script correctly, then saved it in C:\reconnect.bat as a .BAT file? (to do so enclose the name between quotes when saving it in notepad, e.g.:
http://img254.imageshack.us/img254/1093/43433694rs2.gif
(notepad's save as dialog)
also have you replaced "CONNECTION NAME" inside the script with your connection's name as it appears in "network connections"?
i'm sorry if all of this is difficult to understand... i'm working in a version that will just need to be specified the connection's name as a cmd-line parameter... it may even have a GUI version :smile:
at least to get a new ip you just have to switch your modem off and then on. here we have to change the MAC, turn off the modem, give it time, etc... :tongue:
English Version released!
THX to anon. :top:
Thread (http://www.sb-innovation.de/f107/rsd-0-572-english-version-3903/)
haha, no. when i switch the modem off i change the mac first so the isp send me a new ip. i got a static ip too. :(
...
when i run reconnect.bat (it's well configurated, i think), i can't get any new ip. my internet just goes down. and when i repair it, it gives me my old ip.
so, don't know if i'm doing something wrong or my modem/isp doesn't suppor something.
btw, i'm using RSD in english now. everything is so clear.
:quote3:
when i run reconnect.bat (it's well configurated, i think), i can't get any new ip. my internet just goes down. and when i repair it, it gives me my old ip.
mmm you're keeping your connection's name (in the script) between quotes, right? for example, if you have named your connection my inet conn, the script should look exactly like this:
http://img508.imageshack.us/img508/2229/41536230kb0.gif
also, glad to know you're now a happy rsd-translation user :biggrin:
here, a ss of the script.
http://img68.imageshack.us/img68/2541/capturaix9.png
i see we speak the same language :smile:
cmd has trouble interpreting chars like á é í etc... for example rename your connection to 123 and change that name in the script (keep the quotes :smile:)
now i remember i had the same problem too (conn name was the same as yours :smile:)... changing it to 123 (or anything without "fancy" characters) and then modifying the script accordingly solved it :top:
i thought you were german.
i mean, how did you manage the translation?
it's good to know that there's another spanish speaking here.
anyway...
there're no "tildes" in my connection's name now, but the "reconectar.bat" keeps giving me the same ip.
i mean, it's changing it (for the invalid one), but then giving me the same one that i had before.
so, i'm trying new invalids ip for the script, but so far... same ip.
guess i'm screwed.
then i guess your isp's dhcp server knows what IP to give you remembering mac addresses and not acknowledging "last ip i got" (which is what you send and this script tries to spoof)
i think there's anything you can do :frown: well, you can still change your mac's last byte, then reboot your modem... but that isn't as unattended. you can still leave it downloading overnight without the reconnect, despite the big waiting times when you get up next day a lot of the stuff will have been grabbed :biggrin:
yeah, damn isp. :icon_angry[1]:
anyway, i better go to change the mac adress. :p
thanks for all the help.
edit: what if i'm behind a router.
does it make any diference?
edit: what if i'm behind a router.
does it make any diference?
yes. the script doesn't work behind a router because it relies on "talking" to your isp's dhcp server directly, and your router is such a server itself.... you could try getting yourself inside its DMZ (go to 192.168.1.1 (http://192.168.1.1/) and look for that option: enable it and specify your lan ip to be DMZed) and run the script.... this could work because doing so places you "outside" the router (it'd be as if it wasn't there -direct connection-).
if you're using the router to share your connection with other people, tell them what you're gonna do, because it may disrupt their iNet work.
thanks again for your answer.
i'll give it a try later.
but what about my isp's issues (let's call it "static dhcp"??)
would it be a problem if i try something behind a router?
:confused2:
and what "Universal IP reclaim script" is about?
:biggrin:
but what about my isp's issues (let's call it "static dhcp"??)
would it be a problem if i try something behind a router?
:confused2:
if you put yourself in the dmz it'll be as if the router wasn't there, therefore there shouldn't be any problems (i mean, i'm not behind a router and i never had any probs with it) :top:
and what "Universal IP reclaim script" is about?
:biggrin:
new project i'm working on, you'll be able to take a different valid, unused ip for yourself :smile:
i'm loving that proyect already... :biggrin:
...
i'll try with my shitty router then.
and i'll post the results later.
thanks for all the help.
ps: have you read the reconectar guide for routers in german?
ps: have you read the reconectar guide for routers in german?
if you mean this one (http://www.sb-innovation.de/f105/reconnect-bat-f-r-fast-alle-router-mit-curl-2367/?highlight=curl), then yes, it uses curl to GET &connect=0&disconnect=1 for example from your router.. but i think it must be in CRR's (curl router reconnect) list. if so, it'll create a .bat that then you can use as reconnect in RSD :smile:
no, i meant this one (http://www.sb-innovation.de/f66/reconnect-bat-f-r-router-und-modem-519/).
my router is so sh***y that it's not in that list. :frown:
can't edit my own post... :confused2:
i just wanna say that RS has changed.
200 MB per file + it seems to have no wait times between downloads. (but waits before you get the dl link)
i just been download over and over again.
is it just me?
(it's 6 am here btw.)
cheers!
PS: haven't tried that router guide, anon.
tomorrow is the day. gotta use the router. so when i'm done sharing the signal, i'll try it. i hope it works.
i just wanna say that RS has changed.
200 MB per file + it seems to have no wait times between downloads. (but waits before you get the dl link)
i just been download over and over again.
is it just me?
this has happened here too, while testing RSDx6 I could download the same file twice in a row with no happy hours... well what can i say, it's good for us :top:
edit: from the RS news page (http://rapidshare.com/news.html):
No more captchas - higher flexibility for premium-users
July 02, 2008
By eliminating the captchas we simplified the use of RapidShare's free services significantly. In addition, free-users can now upload and download bigger files (up to 200 megabyte). Anyhow, to protect RapidShare from congestion caused by automated downloading, we limited the maximum download speed for free‐users to 500 kilobit per second. To compensate for that, they do not have to wait anymore until starting a succeeding download.
so we have to trade captcha-typing for a two-digit download speed... :|
yeah, yesterday i downloaded 1.5 GB and it took me years (hours). but it didn't stop at all.
RSD is a great dl manager. :smile:
...
so i dmzed my shitty router and i ran the script but as before it gives me the same ip.
but i'm not worried now because RS has changed. and MU in the nights lets me download with no wait times.
so if i need to change my ip for something, i change the mac adress and i'm done.
no big deal.
thnaks for all the support.
and when you release the new script i'll test it here.
PS:
i just been download over and over again. i forgot to write " 've " and "ing". :rolling_eyes:
it seems all your rapidshare problems are more or less solved now, right :smile:
about the reclaim script: thanks for being one of the future betatesters :top: in the meantime you can have a screenie
http://img79.imageshack.us/img79/4798/reclaimdb8.gif
is it still working with the new cat code image??
There aren't any captchas anymore.
But the downloadspeed has been set to a maximum of 62,5KB/s.
juschillin
11.07.08, 00:17
does this work if you have a static ip or must you have a dynamic one?
you must have a dynamic one so that reconnecting gives you a new one :)
juschillin
11.07.08, 03:21
aye thats what i thought.
cheater694
24.08.08, 02:24
0.586 works great! I downloaded over 50 rapidshare links automatically without going to rapidshare site and clicking download... Best rapidshare downloader! :klatsch_3:
rah23sinha
16.07.09, 08:35
is there any software which provides resume support
If you don't have a premium account you can't resume.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.