mRatio 5.4.1

[Unregistered]

Hi there. Please, i need client for Deluge 2.0.3
Thanks.

[anon]

Which system are you running Deluge 2.0.3 on, and how did you install it?

[ar_avishek]

Hi. Sorry to bother you again.
Qbittorrent and mratio ports are different when I'm downloading and uploading at the same time. Is this a problem or there's no need to worry about this? I followed the procedure to bind these two programs port but it didn't work. I saw a setting to manually setup the port in mratio. If I set the port from qbittorrent to mratio manually, will it work?

[kxoty]

Which system are you running Deluge 2.0.3 on, and how did you install it?

I'm running Pop_Os 20.04, and installed using synaptic.

[kxoty]

Which system are you running Deluge 2.0.3 on, and how did you install it?

Anon, if its necessary too much work, don't worry about it, i can use qbittorrent(latest) ok?

[anon]

Qbittorrent and mratio ports are different when I'm downloading and uploading at the same time. Is this a problem or there's no need to worry about this? I followed the procedure to bind these two programs port but it didn't work. I saw a setting to manually setup the port in mratio. If I set the port from qbittorrent to mratio manually, will it work?

I think my previous reply already answered all of that, but... yes, with this emulation, to make both programs appear as one to your tracker(s) their listen ports must be the same. The setting to use a fixed port in mRatio does work (why wouldn't it) and should be set to the same port number you use in qBittorrent. Do that, but make sure to always start qBittorrent before mRatio, because two different programs cannot bind to the same port.


I'm running Pop_Os 20.04, and installed using synaptic.


Anon, if its necessary too much work, don't worry about it, i can use qbittorrent(latest) ok?

I'll assume you're the unregistered poster from before. Unfortunately, Deluge 2.x.x sends different headers depending on which system it runs under (see 33447 and 34372), which makes it impossible to create an "universal" emulation as is the case with most other clients.

I could install Pop!_OS (an Ubuntu-based distro) inside a virtual machine, install Deluge 2.0.3 from the repositories, capture its announces and attempt to create a client file for it, but unfortunately I have very little time for that right now. I'll revisit this and look into it as soon as I'm free.

[deezer]

any client file for Transmission 3.0 ?
Thanks.

[anon]

any client file for Transmission 3.0 ?
Thanks.

Please see the discussion at 34022.

[Leviathan]

I use mRatio 541 but it seems there's upload limit of 256 kb per second. How to ignore this limitation?

Thank you

-------------------

I found the solution. I needed to untick the "Use safer upload speeds" option in Options/General section.

[anon]

I use mRatio 541 but it seems there's upload limit of 256 kb per second. How to ignore this limitation?


Make sure mRatio is set to "expert" mode, then look around the settings for some option about speed limits :wwink:

..

[ar_avishek]

Blutopia tracker showing "Received an unexpected EOF or 0 bytes from the transport stream."

Is there any solution? If, please help me. Thank you. <3

[anon]

Blutopia tracker showing "Received an unexpected EOF or 0 bytes from the transport stream."

34407

I updated the first post.

[ascrounch]

i use old Ratio master 1.9.1, this one semms nice, but is this really different ?

thanks anyway:top:

[anon]

this one semms nice, but is this really different ?

You should try it and see :happy:

[ar_avishek]

Hi. Some trackers showing NAT status in their websites. I use shared connection. Port is closed by my ISP. And until I buy public IP, they won't provide me open port. And also buying public ips here need extra charges and it's costly. So, is it possible to bypass this and showing them port is open, I mean NAT status? Thank you. Sorry for my bad English :3

[illusive]

Hi. Some trackers showing NAT status in their websites. I use shared connection. Port is closed by my ISP. And until I buy public IP, they won't provide me open port. And also buying public ips here need extra charges and it's costly. So, is it possible to bypass this and showing them port is open, I mean NAT status? Thank you. Sorry for my bad English :3

This is true. For that you have to use port forwarding configuration on your modem(router/NAT-device). So when data comes to your modem on PUBLIC_IP:PUBLIC_PORT it will be forwarded to your PRIVATE_IP:PRIVATE_PORT. I'm sure there is at least one tutorial in the forum here about port forwarding. Here are some finds

https://www.sb-innovation.de/showthread.php?7904-How-to-be-Connectable-all-the-time!
https://www.sb-innovation.de/showthread.php?19646-Forward-ports-easily-with-Simple-Port-Forwarding

If these are not up to date and you did not find proper guide here, let me know and I might post one tutorial from private tracker that's properly explains most of things. You also might use https://portforward.com/router.htm to select your modem/router/NAT-device and follow the guide.

[ar_avishek]

This is true. For that you have to use port forwarding configuration on your modem(router/NAT-device). So when data comes to your modem on PUBLIC_IP:PUBLIC_PORT it will be forwarded to your PRIVATE_IP:PRIVATE_PORT. I'm sure there is at least one tutorial in the forum here about port forwarding. Here are some finds

https://www.sb-innovation.de/showthread.php?7904-How-to-be-Connectable-all-the-time!
https://www.sb-innovation.de/showthread.php?19646-Forward-ports-easily-with-Simple-Port-Forwarding

If these are not up to date and you did not find proper guide here, let me know and I might post one tutorial from private tracker that's properly explains most of things. You also might use https://portforward.com/router.htm to select your modem/router/NAT-device and follow the guide.

Thanks a lot for your generous response. I appreciate that. The first two threads are good but old, I think and I'm a noob in these things(never done any of these before, a literal noob). To be honest, I couldn't get in my head half of the things. I tried a few things but ended up getting "an unidentified network" and got disconnected(done something wrong, obviously). I can't find a guide for my router as well. I'm using Xiaomi Router 4AC (Global version) Dual Band.

And I've one more question. Is it really possible "port forwarding" for a shared connection? :(
I'm kinda worried about this. Cause my tracker shows on their website that I got no public IP and port is closed and I can't seed, If someone sees me uploading and reports me, I'm dead for sure. -_-

**SAD NOISEESSS**AND CRYING***
--------------------------------------------------------------------------------------------------

EDIT/UPDATE:
I forwarded the port but NAT status didn't change in the tracker. As I mentioned, couldn't get in my head anything from the threads. So I tried to search on youtube and found a tut and applied it. But still, it won't work.

Maybe here in my country ISPs totally prohibited open ports for shared connections because of their business policies(they have to earn money, you know!!)

So followed this tut below,

https://www.youtube.com/watch?v=M8RQw62Oi2w

Lemme know if this tut is false. :(

[anon]

Hi. Some trackers showing NAT status in their websites. I use shared connection. Port is closed by my ISP. And until I buy public IP, they won't provide me open port. And also buying public ips here need extra charges and it's costly. So, is it possible to bypass this and showing them port is open, I mean NAT status?

Based on what you've written and what I know about the country formerly mentioned in your "location", your provider uses CGNAT. In that case, forget it. Setting up port forwarding of any kind in your router won't help, since there's an additional layer of NAT done by your provider, and they won't open ports for you.

There are no tricks here, the only solutions are paying for a public IP or using a VPN that supports port forwarding (and there aren't any that are also free, work well and are allowed by private trackers).


I'm kinda worried about this. Cause my tracker shows on their website that I got no public IP and port is closed and I can't seed, If someone sees me uploading and reports me, I'm dead for sure. -_-

That's a common misconception. Being unconnectable does not mean you can't upload. Only that others can't connect to you, and connections to or from other unconnectable peers are infeasible. This puts you at a disadvantage and makes seeding more difficult, but not impossible.

[ar_avishek]

Based on what you've written and what I know about the country formerly mentioned in your "location", your provider uses CGNAT. In that case, forget it. Setting up port forwarding of any kind in your router won't help, since there's an additional layer of NAT done by your provider, and they won't open ports for you.

There are no tricks here, the only solutions are paying for a public IP or using a VPN that supports port forwarding (and there aren't any that are also free, work well and are allowed by private trackers).



That's a common misconception. Being unconnectable does not mean you can't upload. Only that others can't connect to you, and connections to or from other unconnectable peers are infeasible. This puts you at a disadvantage and makes seeding more difficult, but not impossible.

Thanks for clearing the confusion. Hope I don't get caught. That's all :')

[anon]

Anon, if its necessary too much work, don't worry about it, i can use qbittorrent(latest) ok?


I could install Pop!_OS (an Ubuntu-based distro) inside a virtual machine, install Deluge 2.0.3 from the repositories, capture its announces and attempt to create a client file for it, but unfortunately I have very little time for that right now. I'll revisit this and look into it as soon as I'm free.

Took some work, but I did it.

34611

[ar_avishek]

[17:18:07 06/06/20][mR 5.4.1][A call to SSPI failed, see inner exception.][(nNz1D6xpMZ9pUg5GGHPW3ipEbVqcw+fI+eQV4lixbUIKOwcV6 gQ4+oPKIEWvdgB3ud4fjzyJSww0zZwjIkypvR8J3aL+AKQ2SAD mpJLa+dmR2meGExIDHWRxbIDpSCwdH2eswONZ0REjdpmZ12Nod 944lBjLMTpBzRQItf97hYM=)(2WqYVJP371pmz2BqIRuahgHmM RHAiO7MIjF98lY8POf3X51/JdbsH2zPu3i/XJ+sytV1+TfvexA1X36nUTcriDX+PjZemaIjfEOvfIgO+Rw3MN AxQXV6W4ROfXECigbFJnc9AMGhx7kgIPdGzwvns29PW2m0WpAn OPwMNGbxFKWPO6PyG7XBacQks3ZLmML57QrglaFA/PsfxC7DuWONO9jK24FJWGD6jd7m8RLIy2wP+gqPMxdzeiNNWWJ A6341LJBA1EVzkl6vILsnAcgpSv8yvKk+amlY817OvttJVJs1U MUy/Rr9HWNUTSMfT+Q2Kz6EHWR7o2tBOBUapw4Puhfz92oD1M0Vpj1 7zy0mkAFi/+phny3sbmkeK+e9wmcYEREQ7IkkVQ3rkd9jRht+aNHjoxAVNkN OcJEKKgXMKg9cuIlQTTY7JocUhtQKKOg+W100uRQ0/LUqIrzeF6hH2tH8IyyVvQ8c0b9fyi3aDh0pdDPNa/HbcVV0PQs29fFxP2v9pEfDm3CvesZ3qWoiZiOmxJ6iDySLXDJH CiPxEmche/ytPshAtRJYUkW0o6C3Rd8X+GzzsSQpe1DHEl23ooYJ62NRKIx+ 30mGHRp8yQobpHFFlt0t/6X7VknVhntaRxREiUrJJ57bmkSkSuq59v0ZJVYU249mCV6Xwc8 3spYyRcpgDCfb+RcjmHTM+ZH4YAotrT9b+i3YLHATx4wGPPIfG rjmvE8qbhL/Hiu57z54eubYGlTmDCj9SBSIuEpoKQ67Na4fPrd8pPhLaE0kjm YmgqINkjZu30g8gQXODKo13Rha+YoV2mHgcNv0N1U8b/zovKtDMBTRvfmNfW2g6CYNiwNNzEgFKmZUiNfY727T+nS70WFM SUrWtMND6Cs6lmUogNw5g2zFq+AOQkTgMdeLL3FC2CapIA1b9w Ipeutw55GjZZQYT8C4bJpY4U7KpiERGCJJ+E4pShoqadEEdQqZ U1MJBQX/xX1bgC3EeN+p0sJZ24Ei6C1xpgNfINPLy6SnsI3p+MULSP3Ztc lnXeM9QVkT5yCSWyzw+qGhgnRbAuRp2gG21u0SRbLIIpPddbrk tfNFMpNrhGkFRWJ1p56iYAJA/R08crNPb1ajYCTmAl1lr7lyeIiF1J3U90p45O4d098kEeKjew7 mYvueYBvtIxTvvmQdsU/MVhiySD+huz2WjJ8+UAwfZVF3f2VCNvhdgp+dpG9thQSVkPPG8 Btsh88XyuW4SPXG4EOdyHAqi6cW1nFw13FaBHrpMfB18mZiibA ijtO73BGMgLzk33lbH7TDItL5xP/S1smZsk/aLcB5pAj/QJV2mZk/fZDzoTI5sa/zz/Ez6jTl5hpINifr400ddNx+54glgX9CZMI700cucBHSC4YsjQKQ WDNe7sTqwqUIFCMnhzjwA/RVJfLhazEBhsgS0wmPHkGAs3FjnH+oq183Go9+jnKUeKHJNqMM 8yuVU9F/OvbZyW6fcoLDNAPjJr1N342N7ZB+tQx6Iy7e3AJvV0yiZhwgF+ xbeZue8gdbhyB5KmT4JtjMuykhCQ6MUR2CWrLofBfhYqzAs4Xu O876CyxQdtCyPMhYJERlzaj+pf9OeHPaBhNi9hr/kgkpxRhwNxCVq//E+ioCx0oHGdn2/tDYkTuNfkY7bi1wlHLLnXSnRBxEU9ox5g42QlKuvb8O3p70YdM Loa0oTN68qVHJkk+30ldd+BDXS9Eb4aihtS3f/2TqeqDKwUTnprzlBkH4Eh+XkZ1NCul98Ch5USOWs6cGrFV5xIA uagv/5YaGNFnX9WW74F400+sq/nSC8yF+mqEArvBElH0WTVk6ITowtaVAF7RYwr/5TFumsNFoO57zu/FrHR/FLCjJ/KyOD+7NqqvE+KK0UEM5g2wyIrbVda9PcIJJ/AdsWrzaWDmtdatoBAex4piir84akFEszrTxu1RGPc+jS0tAzJ0 V84QvhdMcWUugrYf2K2cdu+yH9cYFBM1snvHkn+HgzbpDEscgj IScBCF/WycaniLW2+hBldTc5hYvQwbZNGx7hkNOG+sUjtDpT6SPe+rb4d +UH2pjoKd2XXpdXSZptRCS2wAyCCtxKFFcp6ZMfke6rKj8q7be mNU5unwYF4H47YiVJHvBvgZ9La0bP9YU4gQ4kEc6Nyqe8sJCy7 59ZMerfpeEaf+D3dutxUkj9v6ZWs6B8QDBQQvKJx6kAJZrEMdg GmAkw1XZwVcZx4fC9AfW+n2q+HJfVNOMx30xppQ55TLqmywQ3a 3isHMmFe73Z058DGkHhO4ZW/cdAD0hkuM2d9ihgAf3WYgq55p5Y64HUj5BAL22EzVgj64nlarB iqCxKrG4pqo++0JTZ/U3E0wIwdMUD6k+V4Xmfn799m2pC1qqogDABhbWZGUHbPwXTMrp z3almmFLZislZo71/9hPrM/znaqIyL1nmbnBjgzMXTV2wx1NZ7YnRruPS7fvB94UH7PlHnoPg Xs2eNxkqhDI2fOAUuBUT0c9Qvqh9zuFiaP7KskHU9/EzrEE0IEvbl6DKXCBRsMz8k3xRqDpY8NGI0cZLLciHOXXEb7JK AEldZX2+Yk1BVKq7wtvVc9q2G05sYFSZ8HlfXAC9PXpVxjfN5p 7L88u9IHHhJPQnMNiP+I30Egf4lbFIbQ/n5J155VyvoV5XKUPX8BzrAZgR99AP6jUOC+11LN6ImWaW3z/Cm8XCY59BJ7xNqQ/LHpaWp/7kuDJeZBF0rDW7ZnJMAI1Dh3ca5lOx3ERyJ7WGEJXUZ7j121B2 bUBesrl8FyYhRxcxGdWFErCoUR9qZORlPYcr7rOdeIc4IfFsSF O7Dcig1mjeLrDNff+39Hdtjyy+f0ub12VcqTPiATb16FouR10K 1F97Jw4tI2G0dqDfEfPdfLbPOls8cNE9o/UXVJ2jSRh+RlZ6Dg84vI9dc2QxgB7WZSHy9EOXtv8v76Ym1fu6 WMi+wQStRbbz9mFdwR7W1PRMSzl+MU2JHP94AqFTZe9k/y1enSaFgWm6s3MNLmA6BtsCid9Uz66vYsziRcR96k6SNr5R0KW 0nk+E1oKAMuecaC68FbJTRmh60/enzJpWVeemcZqXX8KzpIFfoDD29MJhvHRYWh7umuFI89DLCPwT xoc6bdNURlhgezSU6C5OVl6OSRGlptL/kEdsDtrsCJkGcF3zF8SIjh/uS4Qu3xCsTlv64KTYBP/YuP20V1obuq+K9Zqp/6lHsdFNjsOJHDbRwtwAZoIN5Xr2b6DuIxUhOLOt7+mCLceYmbT eAFV1WsB6tmmjenC1d+JpUdssZ+2fP1HErT6pBiRvo2nK7PNFy ACDkeZ2BuWYyfLa2J60pNLvZLDEEvDn5+a+SshQNUn9iP6MlYE po2OnZMjX3DiGF8fvfKv+du6iB3LE58j2lRc6U5ScY6izTYPEn ouf75UJG1jp4GSU6OTUv8NRDfKGNL26L4+dUhjwXrrkTHIG67/uJnimfUp56e4FZwngTXRbjgvRPt92/NkN587s9m2gLm6CRsR3M/v9kQ/VTajJHX3aB6/pjvcQbGeRay8h88GK7X9JtKCT0tR8B3aLMn/sJTrzbdOZQLFtzPXL39LOLdGCPofP6wMrDAuGgV7oJd33aVSPs AP2p8xxp0SLIL3cmqz/T27nhbl2woqs+P11PacGphK9KnmDGzp7qovnOlggbjmKbA72Tj K5jUnv96hfYpn8t9I94ddQd5oR+1M+HQpSTDWAiwMLyblo1209 ueG/64awOp47kGo8ByY+YDS9jyT8LJgSIa//DAgCxfC90bTaouIVQxDIKd79BCogwROew9vYDw5IUSw3sXthnu 51llAgiRuTRKWmXGZr35d85UsjSY65af1nP7uS26ZC/vHvp/Wk4/D9epURilVWpw7ukIKWid0qei0EtStBRHhMmaGp6qP0WdbPcyRi CmEgbra5HYACOfyMeS6xB9/U9Kta2pKsx5f5josWMaTpP166XiEjuSWwrmtfyH4a6xNEoOHZr 9aXbrPC75op0zHqe0FZBUmTJibj9RwKIExbZLqNnTWBck/Tnhdol31ct5Qrl54Hb85HQVgwanmqh7USKzqa6yuMXJjkTkGpE Dyb6THi0k/1tk6svejgc8BLQVz45UTeMCdaE0iJ8ylxJLn7wIeVgEWoLCvGF +9SBl/yGwFKSnsJqmqUj+dP9zvGRKVI3zQ2+I4QbWwZg9Mck+RGMF/oDnzAXj0KDlsHEGyB9sIgp+5ALSLX8vOok6cw46PNZZSkTn5lw/UZhkzCDWvY2r+NJ+59cGzZCWC6BWzMhXLp6vr9qzYxStBDvcFc ZHrHljduVG57scHJyLWbpQR6M1VNKkGj4WF0edejoa+H04FMyj 9fpElc/u1BC28DdOvIQxZ991z6FfDwGqlbTxFyF3NAAh2uhb6azzwVz89 ul1KUYcQfCfhm97CQK47YJCR2eVve86WW109lsb9JzujXdvmLu LgMAkJs4NTMWffOCIFwwJ1iMas9qeELeqY55TmZqwfAws1wIqU WO0lo4XxnJy2FagkPxXpK8Xuhy+F+265ynGqdOvJTjDcOhX5mM k=)]


blutopia tracker showing this. any solution?

[anon]

A call to SSPI failed, see inner exception.

This is an Schannel error, but unfortunately the log is encrypted, so we can't actually read the inner exception. Are you using the TLS Fix? A quick visit to ssllabs.com says it's mandatory for this tracker.

[ar_avishek]

Yes, I'm using TLS fix... Few days ago I added 3 torrent files to my mratio and they are just working fine. but today I tried to add some more torrents and this happened.

---------- Post Merged at 22:40 ---------- Previous Post was at 22:36 ----------

20520

as you can see 3 files are running fine and the 4th one isn't starting. red sign remains .

[anon]

Alright, please send me a copy of the .torrent file that causes this error and the TLS Fix log via private message. I'll have a closer look.

[hellodark69]

Any guides/tutorials that help on using the current version of mR?

[anon]

There has never been any, because mRatio was designed to be accessible to people of all skill levels. That's why it has a beginner mode, security warnings, soft speed limits, etc., and they can all be turned off if you don't need them.

[ar_avishek]

Can this have dark mode and be more optimized to handle huge numbers of torrents while seeding on it's next update? Mine sometime stops responding. Seeding 400+ :( My bad -_-

Just a fan request. If not, it's okay. Cuz, it's already amazing. :D <3

[DarkSaibot v.1.3.10]

idk why but i can't change the speed anymore
no mather what i put on speeds it's rolling back to 256 kbs:confused:

later edit : looks like use safer speeds was on :eek:

[anon]

Can this have ... on it's next update?

"Last Update: 11.07.15"
"Developer Last Online: Aug 2017"
"[T]he developer of this program is no longer active, and we don't have the source code..." -- Me, 21.04.20
"I have attempted to contact The248, but received no response." -- Me, 04.05.20

I don't think there will be a "next update", unfortunately. As for the rest of your post, here are some suggestions.

Dark mode: if you open the settings dialog and click on "Change Theme" in the bottom left corner, you can change the color of some UI elements to black, although the overall impact is minimal. I suggest lowering your screen's brightness and color temperature so that bright colors are less of a bother (I use 33% and 2300K).
High resource usage with large amounts of torrents loaded: make sure "reduce memory consumption" is disabled and "don't resize the main window in real time" is enabled in the settings. Increase the interface refresh rate to 2s. Always sort the torrent list by name so that elements only move when you add or delete something. Collapse groups that have less-relevant torrents so that fewer elements have to be refreshed.


idk why but i can't change the speed anymore
no mather what i put on speeds it's rolling back to 256 kbs:confused:

later edit : looks like use safer speeds was on :eek:

You're getting rusty from watching so much porn :ninja:

[ar_avishek]

"Last Update: 11.07.15"
"Developer Last Online: Aug 2017"
"[T]he developer of this program is no longer active, and we don't have the source code..." -- Me, 21.04.20
"I have attempted to contact The248, but received no response." -- Me, 04.05.20

I don't think there will be a "next update", unfortunately. As for the rest of your post, here are some suggestions.

Dark mode: if you open the settings dialog and click on "Change Theme" in the bottom left corner, you can change the color of some UI elements to black, although the overall impact is minimal. I suggest lowering your screen's brightness and color temperature so that bright colors are less of a bother (I use 33% and 2300K).
High resource usage with large amounts of torrents loaded: make sure "reduce memory consumption" is disabled and "don't resize the main window in real time" is enabled in the settings. Increase the interface refresh rate to 2s. Always sort the torrent list by name so that elements only move when you add or delete something. Collapse groups that have less-relevant torrents so that fewer elements have to be refreshed.



Hope he's(coder) okay? :3
But, bless him <3

Thanks for the reply....

[anon]

Hope he's(coder) okay? :3
But, bless him <3

Agreed. My guess is that he got tired of this torrent stuff and moved on. I would have still appreciated a quick reply, however.

In any case, his programming masterpiece is still relevant many years later, and I am pleased I was allowed to be a small part of this project by making a translation, client files and now TLS Fix.

[ar_avishek]

Agreed. My guess is that he got tired of this torrent stuff and moved on. I would have still appreciated a quick reply, however.

In any case, his programming masterpiece is still relevant many years later, and I am pleased I was allowed to be a small part of this project by making a translation, client files and now TLS Fix.

Yes, I appreciate your effort as well. You're giving us so much support and help. Thanks to you, brother. <3
Just don't be gone all of a sudden, like the coder. :(

And here I'm again to bother you. Sorry :(
I got another problem. I registered on a private tracker yesterday. For testing, I experimented with a torrent. And got a message or error. It is "Object reference not set to an instance of an object". And the torrent color is showing yellow.
And not showing the torrent in "active torrent list". So, I couldn't be sure It was actually seeding or not.

Point to be noted, uploading is working. It's adding upload credit to the tracker. So, Should I use mratio in this tracker? Or maybe it's tracker's bug?

[anon]

I got another problem. I registered on a private tracker yesterday. For testing, I experimented with a torrent. And got a message or error. It is "Object reference not set to an instance of an object". And the torrent color is showing yellow.

I was under the impression this was caused by gzip compression in tracker replies, and the redirect.py file I gave you (when you helped me debug the SSPI error) should have also fixed that. Please send me a copy of the .torrent file(s) which have this problem through tmp.ninja and I'll look into it.

[bap]

How can i download the mratio not allowing me, sorry new here

[cloud99]

Hi there,

How can i download the mratio not allowing me, sorry new here
You simply scroll down to the "download now" section and click on the latest version i.e. 5.4.1.
Image: - 20664

Anyways here is the download link: - http://www.sb-innovation.de/attachment.php?attachmentid=15587&d=1436645201
~cloud99

[Marvelboy]

Can someone create uTorrent 3.5.5.45704 client to... :-)

[anon]

Can someone create uTorrent 3.5.5.45704 client to... :-)

I created it for RM+ and should have done it for mRatio at the time, but wasn't sure how high the demand for uTorrent emulations is these days. There hadn't been a new version in literally months :unsure: Anyway, coming soon.

[Marvelboy]

No Problem.. anon.. Take your time.. :top:

[sigduwksnsksis9283]

so i was facing some problems with mratio and memory reader.. i tried to follow this http://www.sb-innovation.de/showthread.php?33714-quot-How-To-quot-use-the-memory-reader-in-RatioMaster-Plus and sort of got stucked at https://i.imgur.com/ERJqOKX.png like i started the torrent on transmission (client file is same on mr too) but this doesnt want to refresh or do anything else.. what am i doing wrong?

[anon]

mRatio's memory reader only works with uTorrent.

[sigduwksnsksis9283]

mRatio's memory reader only works with uTorrent.

oh shit :shockkk!: so only Ratio master plus works for all or is it same in that too?

[anon]

RatioMaster Plus can read any client (in principle) and even remote instances on other computers.

If you go to the client file section for the tool of your choice and look up the emulation you're using, you'll find tips on how the memory reader should be used, if at all.

[sigduwksnsksis9283]

so seeding few k torrents this popups everytime when restarting mr https://i.imgur.com/42QZvrp.png
i click on no because it wipped 100 or so torrents in few trackers when i clicked yes to see... not really a bug.. but anywork around besides having to delete some torrent unless thats the only method?
Also @anon from my previous post i mentioned that restarting the torrent used to make it change id and key will stopping and starting it keeps the same but when i restart the client it seems to fck up.

[anon]

so seeding few k torrents this popups everytime when restarting mr image (https://i.imgur.com/42QZvrp.png)
i click on no because it wipped 100 or so torrents in few trackers when i clicked yes to see... not really a bug.. but anywork around besides having to delete some torrent unless thats the only method?

Someone reported this same error a few years ago, but I was unable to find a cause or pattern for the bug, even after receiving a copy of some .torrent files that triggered it.

If you suspect having thousands of torrents loaded is the reason, you could try Sandboxie to run multiple instances of mRatio and distribute the load evenly among them.


Also @anon from my previous post i mentioned that restarting the torrent used to make it change id and key will stopping and starting it keeps the same but when i restart the client it seems to fck up.

Can you elaborate? Especially on the last part.

[sigduwksnsksis9283]

Someone reported this same error a few years ago, but I was unable to find a cause or pattern for the bug, even after receiving a copy of some .torrent files that triggered it.

If you suspect having thousands of torrents loaded is the reason, you could try Sandboxie to run multiple instances of mRatio and distribute the load evenly among them.

Thanks!


Can you elaborate? Especially on the last part.
Yes, so to explain again when i stop a torrent and start it after few seconds the peer id and key will be same always. But lets say when i restart mr all the id's and keys of all torrents change. now this is what makes me paranoid to use it some top trackers. if this is a common behavior i'll start using it on top trackers after your confirmation and if not, is there any fix for this? or else fml :frown:

[anon]

Yes, so to explain again when i stop a torrent and start it after few seconds the peer id and key will be same always. But lets say when i restart mr all the id's and keys of all torrents change.

That's the expected behavior also followed by qBittorrent itself. Identification data never persists across restarts on any client. The only (potential) problem here is that trackers could observe this behavior only occurring for some torrents if you restart mRatio while keeping qBittorrent open, and since the port number is the same, you can't argue that you're running two instances of the client. The only solutions to this are either never restarting mRatio or always restarting both programs.

[sigduwksnsksis9283]

Nice, Im safe then. Thanks! will try sandboxie and give update if that fixed the deleting issues.

[anon]

Nice, Im safe then. Thanks!

Note that I added some lines to my previous post before you made this reply.

[sigduwksnsksis9283]

Note that I added some lines to my previous post before you made this reply.
Yes, i saw that... i tried to reproduce it multiple times and saw it as i said being only reproduced after the "restarting the client" so i guess i termed wrong on that post by mistake, but thanks..

EDIT: Im talking about this post http://www.sb-innovation.de/showthread.php?34580-qBittorrent-4-2-5&p=357934#post357934

---------- Post Merged on 12.08.20 at 08:13 ---------- Previous Post was on 11.08.20 at 22:45 ----------


you could try Sandboxie to run multiple instances of mRatio and distribute the load evenly among them..
So i tried this and it seems to fix the issue!

[anon]

So i tried this and it seems to fix the issue!

http://www.sb-innovation.de/attachment.php?attachmentid=19123

Pleasantries aside, I'm glad it worked, although I don't consider this a real solution... more of a workaround for a workaround. Not only should mRatio be able to run thousands of torrents without triggering bugs in the first place, it should also allow multiple instances, which there wouldn't be any problem with as long as they're installed in different directories (even listen port conflicts aren't a big deal, as they're not used to receive or transmit any application data).

I'm planning to look into getting instances to run without Sandboxie, but the executable is protected with an unknown packer, so I don't expect much success.

[sashiagustina]

a little advice for the software, maybe should add feature when we choose multiple selection of torrents, we can instantly do massive waffles method and flash method, not one by one

[sigduwksnsksis9283]

a little advice for the software, maybe should add feature when we choose multiple selection of torrents, we can instantly do massive waffles method and flash method, not one by one

it would be dangerous tho... i know some trackers ban on flashing instantly if its above X amount and waffles is good and all but doing it on too many torrents seems dangerous too..

[anon]

The248 didn't even want to add either method in the first place, as he didn't consider them safe. If he were still here, I highly doubt he would implement the ability to automate them on multiple torrents at the same time.

"A computer lets you make more mistakes faster than any invention in human history -- with the possible exceptions of handguns and tequila." -- Mitch Ratcliffe

[sashiagustina]

The248 didn't even want to add either method in the first place, as he didn't consider them safe. If he were still here, I highly doubt he would implement the ability to automate them on multiple torrents at the same time.

"A computer lets you make more mistakes faster than any invention in human history -- with the possible exceptions of handguns and tequila." -- Mitch Ratcliffe
where is he right now ?
well, i will not doubt myself, since several users recommend to use multiple torrents and waffles method for ratio fixing.

[anon]

where is he right now ?

We have no idea. He hasn't visited in three years nor answered e-mails. Furthermore, the source code for the (obfuscated) executable is not available, so none of us can continue development.

[sashiagustina]

We have no idea. He hasn't visited in three years nor answered e-mails. Furthermore, the source code for the (obfuscated) executable is not available, so none of us can continue development.

ah that would be ... hard, reverse engineering :/

[JohnareyouOK]

I'm getting this error message in mratio for a tracker.

object reference not set to an instance of the object. What does this mean?That's a generic .NET error message. If you send me a copy of the .torrent file, I'll be able to get more details.



For most tracker mR5.4.1 is working fine, but with few trackers the smile is orange/yellow and in the logs i get this error [mR 5.4.1][Object reference not set to an instance of an object.]

any idea what is this and how to fix it?

Which trackers, exactly? And have you tried using a different client emulation?

If that doesn't work, please compress the offending .torrents in a ZIP archive, upload it to https://tmp.ninja/ and send me the link via PM. I'll have a closer look.

I got another problem. I registered on a private tracker yesterday. For testing, I experimented with a torrent. And got a message or error. It is "Object reference not set to an instance of an object". And the torrent color is showing yellow.
And not showing the torrent in "active torrent list". So, I couldn't be sure It was actually seeding or not.

Point to be noted, uploading is working. It's adding upload credit to the tracker. So, Should I use mratio in this tracker? Or maybe it's tracker's bug?

I was under the impression this was caused by gzip compression in tracker replies, and the redirect.py file I gave you (when you helped me debug the SSPI error) should have also fixed that. Please send me a copy of the .torrent file(s) which have this problem through tmp.ninja and I'll look into it.

@anon Did this three members send you sample torrents before? If so, any progress or known info on this issue? like reason or how to resolve? Do you still need sample torrents or captured packets? I encountered it too.

[anon]

They all did, and testing suggested this bug was caused by gzip compression, which I solved in mRatio Fixer v5 by decompressing responses and rewriting the Content-Length before passing them to mRatio. If you have .torrent files that prove this wrong as of v6, I am definitely interested on having them.

[ar_avishek]

Hey anon, bro. Long time no talk. Hope you're doing fine.

Will the Qbittorrent 4.3.0.1 client out soon?

TIA.

[anon]

Will the Qbittorrent 4.3.0.1 client out soon?

As soon as I can. In the meantime, feel free to enjoy the latest version of mRatio Fixer :wgrin:

[Unregistered]

Hi,

I have been using mratio for a while without any problems but suddenly getting this error when I try to add a new torrent, has anyone seens this before?


[09:06:17 10/11/20][mR 5.4.1][Creating an instance of the COM component with CLSID {DC1C5A9C-E88A-4DDE-A5A1-60F82A20AEF7} from the IClassFactory failed due to the following error: 80040111.][(YVdYnzxok0Fp1PEKG+PmJ6pobePFXn3fgEwNIg7T0jpvGcbvA +dyzUs/ytPTof2VW1CXDP12tiD3Lo1RE9F0Pu6tM+MnIvbJXjnYr/fuNSC9wc1Zb01PfRFyWmoxX7Ws6fpqL2sd5Gjg+DyhwLWxJC8/g75zFDAdEFdbQuOCw5Y=)(yLWgY+jjqvu5xCnr2ebhjWeOfnPo Gs7nFer23ssjLRzZ+VxlMSLow3sQMa+/nU77S+O2WIQMPBOzITp1MWjoHjuAnSL3qD3ciWhvM2Rq29z0+I uP9nmdsERjpSsjcFdN2op8flT/DX7WV/tS+HtuBmmqjVnLq74PF9Zr9FX3AW/fk2ENCnBx1wCiEqr668FgAE1mzL77tL0XZklF+gwMROXoEz4z4 D4hZkaKghFiSbopmFL6gtYNNo1dzkQnBXWaWfGEnBwfnUjVqZ+ IRsI0DHqC71Pl1uIxIHvo7qEqqCHR1KIaBqof9SKHmYiuAFl8g Mz81k/vK3tFsmYL+iu21LES5R/fSVa/V+KQzHjE8E21cZz3FMXr8rCk3jIcd5P31+toTDaj6rekyElrzj T6w6cEOIQn3GhJKaLqub+1h+YHkAiQOuNZZstpsnsbZDbx99Bm cNZcfwOjKFsDdf+FuQWnSYVhyqi8YCQHi5IPIKAvqKij4F8dzl HLy7W6m8QkeRuyMEevCy4x+GiFVbBG5xhmH0VcGMiDukRvOfe0 nKXMfv6G3PstYTGcaIRWh/TlvfBM29y5tgNWXGHp+YU2u2oHiX+/tivMyRjn20Q2/isRjoiE5BFBSjPJoBYXgUbjPcOYFOtq/UbggXFm4a/UuJYJY2v0jspXikQPtjwcXSqm6WpUtEEEWCCfQkxIlv5B1U5gX ntdyFxwItCVtYmaU58d1ixF1TVmV/rWXOXOAnKXzFt5OPydDrluBrkDGWSYfSmzoFykf07tPzY7r12M pKi63JWXRF75Z9XQfCMEEVET7DoS6Mtifud567mH6njJkyWuwT t/ecGqyWgLmndIR8iGg4BTX6i2E8YZWC7Xlp6t20Du75AtNYQNzO FO5AHkwtHY0xCHTtllhT5R/U4JCyDuts0pXdr4Rt8mAuanQGcCjkHtwcIPO+5NGrJkJiZVyGP vjCFpNQ3+15h6JqgZ6iCG9pF/1n+1Xr8UOH28VG5HY/2WSObljCUahGMlOf4Cqp3gCheIUDW6v2hVHfmNmEWXMbEIN+mz iUOvaaeYbFXmQf+6Zrpx5GL/2yyt6bBRG8Ko7EGPL6e61odWoD/h4/n3CFG0pRtfTTQ16HmW5RAZk0InvwWXTLyYzfY9zJU8ljkAeaZZ puyeZbUqG9z0kLp7ngWXqLnOXv68Gu1hthVRYo33r1IZ9QXvSn f1iFk8aZl1Qn8eveUkOP/RR4ffCxYETlHf1a9P8BjDrEwLFve/H493kI2trzGApE1kFB4PLBTxff80M4/1PeC6fi0at6mcGvfkstB+8VWZv/u7T3kssgAAL3zUYx32uvUMjmzhMGM96b+6hv8x3OGByjLC1KaY LMCstyVQIen1f1M/ao04AcHLfGsTwFmn0UbwyzzOnhmE2ekJRhiMIhhXpbJTvRaSe8 I5JjV03DELFX+KrZUu/focBsgIOu5aZZC7xu6d1qn0uc12zS05qxsUCcmMmloQuBeY5RY dpOUN+Fsn2w0QjQU6GQ0mG36e19C81tG+IOOQpjH5TGauDiMTp Du7lKEKtegWkj1y0jVCCsVHuumfiqQ+Q86WL6Aw0FUqVo5II5t ZNZQiEK/lne2HuY4HBYJKOV28GyyeVBpqB0/K2EwxbG81JtKlnq4MKL4ogNPe2y1FdHvNJ1/1Rwlk8sQjrb+gB9jQVPm48nMA+mTJ1Xt6bmOLi+4vg83wCVnjg SU6Pxpb+UXg+5cMQXwNMCajpRNeI2MVxUJwW+A1zcqasKFX4nT Zj1MI2Ew6Ai9JXAC4O6Mr1Ms0C2v6mVNTe9lLA1zVWoVBivoiA 1zCP8YtiBw0ZIyGYpFTfcxrgVFBijk9AIdAd28bU9VX3w0BjBj 2riD2zJP7ET7tgLN5ZpHJNAExmpJ3/RYd1g8zDIvZzfsbtiKWZcPQYkIG17UGEiWONJs7wXhaZLukqbL v1gmMsHkxEi45AW7IJIzEuFFyAAFjL/WgsCN/3k6kgzIxBvdUV8w8RchLhq9D5rn2W4zxitfc0bkqf7Z08jU5mH btFTOkHtqVcjCt998xM/NjJrT4vCslr153csTq+R832ctOlJqyP6qrESlUP+GuuBgyMKEs/y2At00HSkp6chqtNtEsa/9xy5lUXfZhv/BCYC9Vh7v4l3379gAnbfs36pPxl6IkVgHzDUvEDSNgRabg+8+3 kYQOZpXF/kOuEKNnB3sj7ZhDjS+FkLrA9QSeQUklrZs0mKz85+cdnfcMSk+ cmO5fwN9BIp8bKYLeM0M1cdGs9eSXyqJwb4/RFRSiO/bBoiLGY1reGJso8xM13SLRFtbx1ZauclXNiTpTDTyEci1NGXmB Kw2gGhBy/++j+cGYQZ/O1e7AaQ4ujtqFbByrOBvDB/baknrnjrylkKiz+AU0pkXe4+oVaf5RKRxmVIUkVzfiA640x2aB V/ZDV7L+rmtgmlXL3jUfB7h2PkZVqfeYtMxc6125V6br5uiLqKt0 1Y4O/mf79k7/2RBZQPak0rZGm0OPBPiCx9dXToDjm6sMTvSHEFqfnFUX/gCgMFLZXsisy1LMokzHtGXNsiNL3xZnOwHPJXxjoFHYgHaiBjJ 8GckUuVLhQKOpeVL0BnX0C9W1c8uWhYsh3Z1apcwlFtn2ALYZa Eqne87mbPD9zQRE1ZZ1caAY1lY9wO6wHD1DdspQpfmhAx19UT9 exCZY2Bw29h+4xz9zRpDIHg7YdIXAV9nmQCQcaX/NEUnhy1WZ7mAQ+M0fELuyTRLS+H0leYgSAoCj8FOy7zMcOMQ4d KapLCjvx4BRGLi5Lab1bjAhb6cJNhxPUo1TGESLvJeHxZvBUGD xb4uNzEi3qbiUPojqCscvjUyIsTal0xvDk7yU3HVsXIJXNympj y/kiIYCa1z40K6fBkpSjihF+aD+8r80C2MDs0bRKgWnhyUyrCVLT 9jqZnrZFsYlkbRAHEUC532lEJq86NoR1G6+NhGKiPuvIf+bc0s gd2JbuYX7iZ3o2vjZFie7KibqbS1/dIpKgbgkRrh+XEttUvazevtHSKL1hn4RzTKpqLBtPU2ve4lnqI 5n)]

[anon]

Not ever, but that CLSID belongs to the "open/save file" dialog. https://answers.microsoft.com/en-us/windows/forum/all/windows-10-1809-software-problems-in-high-contrast/c8a06e0d-09f9-4ccb-806d-3a5fecdf20ae mentions this same error (also on .NET programs) and offers some possible solutions.

[Unregistered]

Hi,

As the title says, is SOCKS5 proxy supported in mRatio?
I am trying to use my VPN provider proxy server which is a SOCKS5 on port 1080 but I'm getting connection timeout each time I start a torrent file.

[anon]

As the title says, is SOCKS5 proxy supported in mRatio?

Yes, but unfortunately proxy support is very broken.

HTTP doesn't work at all; the request will be crafted as if addressed to the proxy, but sent directly to the destination instead.
SOCKS works, but the destination port is forced to be 80 for HTTP and 699 for HTTPS trackers, which means the latter won't work and neither will any tracker that uses a custom port.

You can work around these issues by relying on a third-party program like Proxifier, SocksCap or proxychains-windows instead. If you're using mRatio Fixer (see 34407), the situation is even more complicated: you'll have to set everything up as described on the thread, with 127.0.0.1:8080 in mRatio, and then use one of the aforementioned programs on the mitmproxy process instead (which is where you'll ultimately configure your VPN provider's proxy).

[JohnareyouOK]

In terms of handling torrents deleted by tracker, eg after the tracker returns message "unregistered torrent", does the real client continue to send tracker messages at intervals? and does mR handle this situation the same way as the real client?

[2020/12/17 18:41:53] Receiving data ...
[2020/12/17 18:41:55] The tracker returned the following failure reason: unregistered torrent
[2020/12/17 18:41:55] Now downloading ...
[2020/12/17 18:41:55] Torrent settings saved.

[anon]

after the tracker returns message "unregistered torrent", does the real client continue to send tracker messages at intervals? and does mR handle this situation the same way as the real client?

Yes and yes. Failure reasons are a generic way to show an error message, and unlike us, clients don't know that "unregistered torrent" or "invalid passkey" are rather permanent errors. So the treatment is always the same: keep announcing following the tracker's interval, or 1800s if no interval was specified.

[stipy]

very nice tool. uploaded 5 tb @ 1 gb/s with one file and the very popular hard (nearly impossible) to maintain a good ratio tracker doesnt care a damn shit. lul

[cirulilu]

very nice tool. uploaded 5 tb @ 1 gb/s with one file and the very popular hard (nearly impossible) to maintain a good ratio tracker doesnt care a damn shit. lul

You sir are our hero

[H265]

very nice tool. uploaded 5 tb @ 1 gb/s with one file and the very popular hard (nearly impossible) to maintain a good ratio tracker doesnt care a damn shit. lul

:klatsch_3:i did this on hd-torrents back in 2012. I was in the top 10 uploaders for a few days before they deleted me. :tongue:

[anon]

very nice tool. uploaded 5 tb @ 1 gb/s with one file and the very popular hard (nearly impossible) to maintain a good ratio tracker doesnt care a damn shit. lul

That's amazing until or unless you get banned! By the way, what was this mysterious apathetic tracker?

[JohnareyouOK]

What does this yellow exclamation mark mean when adding torrents?
searched this thread for bang mark yellow exclamation etc but no answer.
https://i.imgur.com/6QuS7lX.png

[stipy]

doesn't look like they are noticing or investigating these "treatments" yet - and it has been a long time. But of course you should hide your entry in the top lists. It's a top audio tracker that starts with o and their concept is just plain stupid: even as a webseeder there is perceived no way to upload even a few GBs in the usual way and no way to get upload credited for seeding points or uploaded content. So I agree with that. Thanks for the great tool.

[anon]

What does this yellow exclamation mark mean when adding torrents?

It means there's something wrong with that torrent: already added, invalid .torrent file, no tracker announce URLs, etc. The reason should be displayed next to it.


It's a top audio tracker that starts with o and their concept is just plain stupid: even as a webseeder there is perceived no way to upload even a few GBs in the usual way and no way to get upload credited for seeding points or uploaded content.

Seedboxes do work on music trackers, but you must use them correctly and have some patience. It's not like on general trackers where you can pump and dump a popular torrent and get a few hundred GBs of upload in the process.

Anyway, good to know that the mRatio seedbox was a success, tee hee hee...

[cirulilu]

On the music trackers the best/only way to build ratios is to upload. Just get/find a deezer, tidal, qobuz account and upload any 2020, non english maybe, releases not on the trackers. Bunch of seedboxes will pick up anything 2020 straight away.

[sashiagustina]

It means there's something wrong with that torrent: already added, invalid .torrent file, no tracker announce URLs, etc. The reason should be displayed next to it.



Seedboxes do work on music trackers, but you must use them correctly and have some patience. It's not like on general trackers where you can pump and dump a popular torrent and get a few hundred GBs of upload in the process.

Anyway, good to know that the mRatio seedbox was a success, tee hee hee...

wait... mratio now become an add-on in seedbox ? thatwould be awesome

---------- Post Merged at 09:15 ---------- Previous Post was at 09:14 ----------


On the music trackers the best/only way to build ratios is to upload. Just get/find a deezer, tidal, qobuz account and upload any 2020, non english maybe, releases not on the trackers. Bunch of seedboxes will pick up anything 2020 straight away.

This is valid info:) 2020 song, or at least 2010s above. your torrent will get some robot leechers

[sigduwksnsksis9283]

Bunch of seedboxes will pick up anything 2020 straight away.
idk if this was mentioned in this forum before but you can find a vinyl release and while uploading change the release date to 2020 and make sure that discog or whatever other service don't have the musicans [that album] name and its one way to upload town and after the upload has been uploaded change the release date fast and if staffs ask anything just saying it was typo or a copy pasting mistake:tongue:. its easy upload for first 1 or 2 uploads will be probably leased unless staffs read this and get more strict.

[JohnareyouOK]

wait... mratio now become an add-on in seedbox ?It's metaphor, act like a 1Gbps seedbox. Tbh I'd also like to have an auto-dl cheating solution as fanatic, but certain post before seems have mentioned too much automation is not desired to avoid excessive abuse. But personally just thinking about "it will be possible to use it with AutoDL-IRSSI after Ratio-spoof (https://www.sb-innovation.de/showthread.php?34569-Ratio-spoof-(Windows-Linux-Mac)) is further improved" makes me excited. :letsdance:

[anon]

while uploading change the release date to 2020 and make sure that discog or whatever other service don't have the musicans [that album] name and its one way to upload town and after the upload has been uploaded change the release date fast

Very clever metastrategy, although not one I would personally use because... well, uploading stuff you don't even care about so that it gets autosnatched is already bullshit, and deliberately mislabeling said stuff to dupe autosnatchers into grabbing it doubly so :gnoes: Besides, as you said, staff will catch on eventually.


Tbh I'd also like to have an auto-dl cheating solution as fanatic, but certain post before seems have mentioned too much automation is not desired to avoid excessive abuse.

That was probably me advicing both against automatic cheating and pretending to be a seedbox from your home IP. Neither usually ends well.

[sigduwksnsksis9283]

It's metaphor, act like a 1Gbps seedbox. Tbh I'd also like to have an auto-dl cheating solution as fanatic, but certain post before seems have mentioned too much automation is not desired to avoid excessive abuse. But personally just thinking about "it will be possible to use it with AutoDL-IRSSI after Ratio-spoof (https://www.sb-innovation.de/showthread.php?34569-Ratio-spoof-(Windows-Linux-Mac)) is further improved" makes me excited. :letsdance:

hit me up on that if your interested as i have made a proper/pseudo style seedbox. all we want is to use flex get then remove * and keep *REMUX* items and download and upload using the Biglymod's ratio tool. if only we could have further improvised on the changing part from ratio to speed ++ mode then it would have been well achieved as cheating on remuxes is by far stable on general trackers. gained 1tb a day by cheating on them but the manual work is hard as i got to keep and eye out in case the uploader limits his speed on the torrent. this is why its undo able on chinese trackers without manual work.

[cirulilu]

people, cheating is bad, don't do it :crazya:

[cirulilu]

I am trying to use this on the worlds stupidest tracker omg.wtftrackr, and this thing says no valid tracker available. Doesn't it recognize because the domain is xyz and this tool is too old? :stupid:

edit: now i see the tracker is using udp not http, and this tool will never get updated

[anon]

To be fair, this may be the first private tracker in existence to use UDP announce URLs. I'd like to have a closer look, so I'd appreciate it if you could send me one or more .torrent files from them.

[silencer1980]

is it ok to request latest client file ? (qbittorent 4.3.3)

[anon]

is it ok to request latest client file ?

Of course it is - with very few exceptions, I only create emulations by request, since I don't have time to supply them preemptively whenever a client is updated.

Anyway, I'll do qBittorrent 4.3.3 soon... surprised no one asked for 4.3.2.

[ramziukas]

qBittorrent 4.3.3 file dont have Memory reader available. Is it safe to seed without memory reader?

[JohnareyouOK]

qBittorrent 4.3.3 file dont have Memory reader available. Is it safe to seed without memory reader?4.3.3 use individual peer_id, lacking of memory reader wont be an issue as long as no same torrents running in both normal and cheating clients and their ports already set to the same.

[anon]

At the risk of sounding crude, you should read the client file threads instead of just clicking on the download link, it'll be very helpful =]

[qianbx]

I am very confused,why the max download speed is limited to 40MB?Now many Seedbox or VPS provide 1Gbps Speeds

[anon]

For two reasons.

40 MB/s was an extremely generous number when these limits were decided upon;
pretending to be a gigabit seedbox is not the expected usage scenario for mRatio, nor a good idea.

[Suvajit56]

Can We use mRatio As a Seedbox Client Which will inform to the tracker connectable / seedbox seeding
How to set up Connection setting ?

I have some info given By the Seedbox

Server: poltergeist

IP: 185.149.**.**

Port(showing at Tracker when using a Seedbox): 51026

Preferred torrent client: rtorrent

Need a assistance.

[suicideLEOPARD]

Hello! I was wondering if we could get a uTorrent client file for version 3.5.5 (build 45852). I am guessing this is why my memory reader is not working. However, the version of the utorrent I am using shows up in the memory reader, but when I go to search and apply, it states that no torrent found using the version I have. Thank you very much. I have been using Ratiomaster 1.9.1 for a few days and I must have not even configured the memory reader properly there, I am surprised I am not banned. Thank you very much again. :smile:

[anon]

Can We use mRatio As a Seedbox Client Which will inform to the tracker connectable / seedbox seeding

As said in the post immediately above yours, pretending to be a seedbox with mRatio is a bad idea. Pretending to be a seedbox with mRatio when you have an actual seedbox is simply cringeworthy.


I was wondering if we could get a uTorrent client file for version 3.5.5 (build 45852).

Will make it soon.


the version of the utorrent I am using shows up in the memory reader, but when I go to search and apply, it states that no torrent found using the version I have.

Make sure you...

run mRatio as administrator
haven't renamed uTorrent's executable from utorrent.exe
have at least one active torrent (ideally more)
have bt.randomize_peer_id set to false in the advanced settings


I have been using Ratiomaster 1.9.1 for a few days and I must have not even configured the memory reader properly there, I am surprised I am not banned.

1.9.1 isn't even the last version in the 1.9.x series, which has known bugs in its emulation (see 355881), so consider that a near miss indeed. Also see 34407 and 33029.

[Suvajit56]

I have information about seedbox. Actually I don't have seedbox. I want use mRatio as Seedbox client(rtorrent) which inform to the tracker fake upload and also Connectable will be shown in tracker. I got rtorrent mratio client file. just need proper connection setting . please help.
how to set connection setting of mRatio which will showing to the tracker connectable or seeding with seedbox ?

[anon]

What a great plot twist... but here's another. Absolutely anyone can have the "information about seedbox" you posted. Just load a torrent with lots of them and copy it from your client's peer list =] Anyway, for the sake of argument, let's see what you would need to achieve your goal.

Run an HTTP proxy on a seedbox or datacenter IP - which no, using "IP/hostname to report to tracker" won't replicate.
Bind to the TCP port you're using for mRatio on the same box, by running something like `nc -Lnzp 51026' remotely.
Install mRatio Fixer, then configure the proxy you set up in step 1 as an upstream in config.yaml.
Use a client emulation commonly associated with seedboxes, like rTorrent or Deluge (optional but fitting).

If you manage to do all of this, you'll have your own "mRatio seedbox"... which can still get caught if you make stupid mistakes or the tracker has good detection scripts, because you're still cheating after all.

[qianbx]

Why sometimes show this error log

The tracker returned the following failure reason: Invalid peer_id (21 - -UT2210-%16b5%CB%C2%AD%8E%27%06%87C%5E%C3)

Another question,if i setup the proxy(such like 127.0.0.1:8080)first,and now i want to cancel this proxy.only i can do is to be deleted this torrent and add it again without proxy.Is there any easier way to modify it directly?

[suicideLEOPARD]

As said in the post immediately above yours, pretending to be a seedbox with mRatio is a bad idea. Pretending to be a seedbox with mRatio when you have an actual seedbox is simply cringeworthy.



Will make it soon.



Make sure you...

run mRatio as administrator
haven't renamed uTorrent's executable from utorrent.exe
have at least one active torrent (ideally more)
have bt.randomize_peer_id set to false in the advanced settings



1.9.1 isn't even the last version in the 1.9.x series, which has known bugs in its emulation (see 355881), so consider that a near miss indeed. Also see 34407 and 33029.

Okay I will wait for the client. Why did you post a link of ratiomaster plus 2.1. Is it better and safer than mRatio 5.4.1?

[Suvajit56]

What a great plot twist... but here's another. Absolutely anyone can have the "information about seedbox" you posted. Just load a torrent with lots of them and copy it from your client's peer list =] Anyway, for the sake of argument, let's see what you would need to achieve your goal.

Run an HTTP proxy on a seedbox or datacenter IP - which no, using "IP/hostname to report to tracker" won't replicate.
Bind to the TCP port you're using for mRatio on the same box, by running something like `nc -Lnzp 51026' remotely.
Install mRatio Fixer, then configure the proxy you set up in step 1 as an upstream in config.yaml.
Use a client emulation commonly associated with seedboxes, like rTorrent or Deluge (optional but fitting).

If you manage to do all of this, you'll have your own "mRatio seedbox"... which can still get caught if you make stupid mistakes or the tracker has good detection scripts, because you're still cheating after all.
I have downloaded mRatio fixer 7. How to configure config.yaml?

[anon]

The tracker returned the following failure reason: Invalid peer_id (21 - -UT2210-%16b5%CB%C2%AD%8E%27%06%87C%5E%C3)

Well, that is invalid (length 21, should be 20) and also looks nothing like a real uTorrent peer_id. What client file and tracker are you using? Memory reader? mRatio Fixer? Any programs like Shadowsocks, PowerTunnel or GoodbyeDPI that manipulate requests to evade filtering systems?


Another question,if i setup the proxy(such like 127.0.0.1:8080)first,and now i want to cancel this proxy.only i can do is to be deleted this torrent and add it again without proxy.Is there any easier way to modify it directly?

If you're familiar with bencoding, a way to mass-edit .mRSave files is detailed at 359303, but in this scenario you want to do the opposite of that: find the proxy settings and wipe them. Unless you have many torrents, however, removing and readding is just easier.


Why did you post a link of ratiomaster plus 2.1.

Just in case you weren't aware of it :gsmile:


I have downloaded mRatio fixer 7. How to configure config.yaml?

You should refer to the mitmproxy 4.0.4 documentation for that. Also, your proxy must support the CONNECT method and allow it on non-443 ports (for trackers that use those), because HTTP-only proxies won't work on HTTPS trackers, and SOCKS is not supported as upstream at all... unless you use Proxifier or SocksCap to chain the mitmproxy.--- process :rolling_eyes: And make sure to secure your proxy, or else botnets and IoT search engines will find it in a few hours.

Also, don't blame me or this forum if you get banned even after doing everything right.

[qianbx]

Well, that is invalid (length 21, should be 20) and also looks nothing like a real uTorrent peer_id. What client file and tracker are you using? Memory reader? mRatio Fixer? Any programs like Shadowsocks, PowerTunnel or GoodbyeDPI that manipulate requests to evade filtering systems?



If you're familiar with bencoding, a way to mass-edit .mRSave files is detailed at 359303, but in this scenario you want to do the opposite of that: find the proxy settings and wipe them. Unless you have many torrents, however, removing and readding is just easier.

Firest question,if i close mRatio Fixer it would be better,but some tracker(such like FRDS),must using mRatio Fixer,or it can't be work

Second question,Unfortunately,I'm seeding more 2K torrent,so if i removing and readding,it would be a large project

[Suvajit56]

How to change Listening port and Proxy in mRatio fixer?

---------- Post Merged at 10:40 ---------- Previous Post was at 10:23 ----------


What a great plot twist... but here's another. Absolutely anyone can have the "information about seedbox" you posted. Just load a torrent with lots of them and copy it from your client's peer list =] Anyway, for the sake of argument, let's see what you would need to achieve your goal.

Run an HTTP proxy on a seedbox or datacenter IP - which no, using "IP/hostname to report to tracker" won't replicate.
Bind to the TCP port you're using for mRatio on the same box, by running something like `nc -Lnzp 51026' remotely.
Install mRatio Fixer, then configure the proxy you set up in step 1 as an upstream in config.yaml.
Use a client emulation commonly associated with seedboxes, like rTorrent or Deluge (optional but fitting).

If you manage to do all of this, you'll have your own "mRatio seedbox"... which can still get caught if you make stupid mistakes or the tracker has good detection scripts, because you're still cheating after all.
"Install mRatio Fixer, then configure the proxy you set up in step 1 as an upstream in config.yaml"
how to change or configure listening port and proxy In mRation fixer 7?

[suicideLEOPARD]

Make sure you...

run mRatio as administrator
haven't renamed uTorrent's executable from utorrent.exe
have at least one active torrent (ideally more)
have bt.randomize_peer_id set to false in the advanced settings



Im still getting the error that says that no torrent found using utorrent build 45852. I followed all the instructions you have told me. By active torrent do you mean in mratio or utorrent? Because I have about 30 active seeding torrents. Thanks

---------- Post Merged at 17:33 ---------- Previous Post was at 16:59 ----------

Also, I got it to work. However, when I start to upload a torrent in mratio, it shows up as leeching on the torrenting website. Is there any way to set the torrent in mratio as 100% completed, because I can't find a setting to change it.

---------- Post Merged at 17:41 ---------- Previous Post was at 17:33 ----------

I found the option to set is as seeding too, no worries. Also, do you reckon there is a lower chance of getting caught if you are seeding 30 other torrents legally, next to the illegal?

[anon]

Second question,Unfortunately,I'm seeding more 2K torrent,so if i removing and readding,it would be a large project

Get familiar with how bencoding works (see 4641) and then you'll be able to use the Notepad++ method. I think it's basically a matter of setting the proxy type to 0 and deleting the other values, but I'll leave it as an exercise for the reader.


"Install mRatio Fixer, then configure the proxy you set up in step 1 as an upstream in config.yaml"
how to change or configure listening port and proxy In mRation fixer 7?

Don't take it personally, but if you need to ask the same question thrice, you probably shouldn't attempt this.


do you reckon there is a lower chance of getting caught if you are seeding 30 other torrents legally, next to the illegal?

Unfortunately, things don't work that way. Cheating is mostly detected via scripts that warn staff when one or more thresholds of suspicious activity are reached. Moderators aren't going to check your account and think "this torrent looks weird, but the other 'x' ones he's seeding a lot are fine, so I'll let it go"; they're going to base their decision on the "weird" one(s) alone, especially considering that 1. fake seeding is trivial to perform and very difficult to detect, 2. there are certain indicators like malformed announces or implausibly high speeds that essentially guarantee cheating (not a problem with mRatio if used correctly, however).

In other words, you only need to screw up once to potentially lose your account, and torrents where you didn't cheat or didn't get caught cheating don't have any influence on that. Make sure all of them look "legal" and you'll be fine.

[Suvajit56]

I am not too pro to use mitmproxy. I am not computer expert or Client mode maker expert. You were telling me all of this are difficult to me especially for mitmproxy documentation process .That's why I am asking if You can you guide me in easier way or step by step or any tutorial link that will help me. Thank You

[schvifty]

Hi @anon,

Is it possible to modify mRatio in some way so trackers report correct information?
For example one of my trackers doesn't report the number of seeds, only peers.

[qianbx]

How to change client with multiple torrent？

[sigduwksnsksis9283]

How to change client with multiple torrent？
select all torrents then advance then Change emulation then select your client and so on , i also urge you to look at every parts of this software for your own good in your free time as this is something you can just find by looking with few mouse clicks:rolleyes:

[anon]

Is it possible to modify mRatio in some way so trackers report correct information?
For example one of my trackers doesn't report the number of seeds, only peers.

Firstly, if the tracker doesn't have the ability to report this information at all, there's nothing that can be done about that. The only way would be to connect to every peer and "classify" them (assuming the tracker gives you 100% of the swarm and everyone is connectable), and ratio tools don't connect to peers by definition.

Secondly, there's a bug in mRatio that causes this data to be parsed incorrectly when it doesn't come from scraping, making the information displayed useless and the "stop fake upload if there are less than 'x' peers" feature unreliable... not that it would be bulletproof otherwise.


select all torrents then advance then Change emulation then select your client and so on , i also urge you to look at every parts of this software for your own good in your free time as this is something you can just find by looking with few mouse clicks:rolleyes:

One caveat: the torrents you want to edit must be stopped. Can't swap your car's engine while you're still driving it =]

Agree completely with the last part, by the way...

[sigduwksnsksis9283]

One caveat: the torrents you want to edit must be stopped. Can't swap your car's engine while you're still driving it =]

Ah. well i would have expected that he would learn it by himself! but instructions unclear failure may occur and that failure may or may not teach him.

[anon]

Well, I wanted to preemptively avoid a "why is the 'Change Emulation' button unusable" post... which my experience says is more likely :happy:

[qianbx]

select all torrents then advance then Change emulation then select your client and so on , i also urge you to look at every parts of this software for your own good in your free time as this is something you can just find by looking with few mouse clicks:rolleyes:

OH,I know,must stop it first

[ar_avishek]

Hey Bro. Hope You are doing well. <3
Requesting For Qbittorrent 4.3.4.1 client. TIA.

[anon]

Requesting For Qbittorrent 4.3.4.1 client. TIA.

See 361538.

[suicideLEOPARD]

uTorrent 3.5.5 (build 45966) client request please. My uTorrent auto updated so I am stuck here now. Thank you very much. :negro:

[anon]

uTorrent 3.5.5 (build 45966) client request please.

Coming soon, hopefully.


My uTorrent auto updated

This is partly why I made Clean uTorrent... although you can turn this feature off in the official version, and if you look under "updates" in your configuration directory, you'll find the executable for the build you were using before.

[suicideLEOPARD]

Oh right I just found it. Thank you.

[ar_avishek]

Sorry, brother. Was not aware of this bad news. Pray that you overcome all your difficulties very soon.

[anon]

All client files are up...

[anon]

What does this yellow exclamation mark mean when adding torrents?
searched this thread for bang mark yellow exclamation etc but no answer.
image (https://i.imgur.com/6QuS7lX.png)


It means there's something wrong with that torrent: already added, invalid .torrent file, no tracker announce URLs, etc. The reason should be displayed next to it.

Correction: what I said actually applies to red exclamation marks. Yellow ones merely mean a torrent does not have the private flag set further experimentation revealed presence of the private flag is not a factor, or at least not the only one.

Also, mRatio can't handle .torrent files where the "announce" key is non-existent or incorrectly set to type list instead of binary. The error messages in those cases will be "no announce" and "unable to cast object of type 'System.Collections.ArrayList' to type 'System.Byte[]'", respectively. But these should be exceptional for private trackers, and can be corrected manually via BEncode Editor without altering the info_hash.

[nandasasmita]

please update client qbitorrent v4.3.5

[czullo]

Just wait, and till then use 4.3.4.1. anon will update it when he will have time.

[anon]

Being worked on...

[csverona05]

please update client qbitorrent v4.3.5

Also for qbitorrent v4.3.6 would be great. Thank you!

[anon]

Also for qbitorrent v4.3.6 would be great. Thank you!

Uh, both have already been posted in the mRatio Client Files section...

[ldeveraux]

can we have a client file for utorrent 3.4.2 build 33080 ?

[anon]

I'm going to need you to provide a copy of that particular build, as I can't seem to find a (working) download.

[ldeveraux]

I'm going to need you to provide a copy of that particular build, as I can't seem to find a (working) download.

Thanks, does this work?
shared file (https://www.jetdrop.net/F4gqkCvBQFw#IwFgNCwQ7GCsd62ABkQJgMzLisx0BOeTMbMdEc YQ4uANn2NUwH0AOASQFEBNAdQAqvAPIBHYAFkApgDEA1gCMAXs oAyg7vJTzMagC4iAltwCK+gHZA)

[anon]

It did :gsmile: Client file is up.

[ldeveraux]

It did :gsmile: Client file is up.

Working 100% thanks a million!

[anon]

Interesting choice of version, by the way. Between 1.8.5 and 3.5, uTorrent went through a stage where it wasn't sure what it wanted to do in life.

[Unregistered]

Hi,

So the recommendations seems to be to add the same port for qB and mRatio.
When I specify the qB port in mRatio I get the following warning:

"Only one usage of each socket address (protocol/network address/port) is normally permitted".

I am using latest qB and mRatio versions + mRatio Fixer 7 if that matters.

Is there a solution for this?

[ldeveraux]

Interesting choice of version, by the way. Between 1.8.5 and 3.5, uTorrent went through a stage where it wasn't sure what it wanted to do in life.

I needed the remote access and didn't want all the bloat. This might have been one of the first versions with that feature? Regardless, I wonder why the automatic stop doesn't work? I had to set "bt.randomize_peer_id" back to true because false was killing my local internet. Is that the reason?

[anon]

"Only one usage of each socket address (protocol/network address/port) is normally permitted".

I am using latest qB and mRatio versions + mRatio Fixer 7 if that matters.

Is there a solution for this?

In this particular scenario, this is not a problem as long as you always start qBittorrent first, so you can ignore the error.

[anon]

I needed the remote access and didn't want all the bloat. This might have been one of the first versions with that feature?

I honestly have no idea since I don't require such a thing (and if I did, I'd use the regular Web UI which doesn't rely on a third party).


Regardless, I wonder why the automatic stop doesn't work?

Going to need more details on this. Do you mean the automatic stop on uTorrent, or mRatio?


I had to set "bt.randomize_peer_id" back to true because false was killing my local internet. Is that the reason?

I've had that set to false ever since it was added and never experienced such a problem, or even heard about it until now. :idunno:

[ldeveraux]

Going to need more details on this. Do you mean the automatic stop on uTorrent, or mRatio?


mRatio will not stop automatically when I tell it to stop after ratio >1. It just keeps "uploading"



I've had that set to false ever since it was added and never experienced such a problem, or even heard about it until now. :idunno:

the info to change bt.randomize_peer_id was in the thread where you posted my client file. I don't know why, but utorrent completely kills my internet now even if I'm downloading something slowly. I have the proper port forwarded too, very strange

[anon]

mRatio will not stop automatically when I tell it to stop after ratio >1. It just keeps "uploading"

I'll have a look at this.


the info to change bt.randomize_peer_id was in the thread where you posted my client file.

Yes, that's necessary because mRatio may read the wrong peer_id if you have non-private torrents that actually qualify for randomization.


I don't know why, but utorrent completely kills my internet now even if I'm downloading something slowly. I have the proper port forwarded too, very strange

I'm at a loss as to what to recommend here. My only advice would be to check the official changelogs in case such a problem is known to be associated with this particular version.

[lotteria]

I'm newbie here, i've used mRatio since 06/2020 and i'm still don't know what is Memory Reader is, can someone please explain to me or just send me the thread that has related infomation, thank!

[anon]

Check out this aptly-named thread.

33301

[Unregistered]

Check out this aptly-named thread.

33301

@Anon

You are working on the client qBitorrent 4.3.8?


I appreciate your work, I can't login to the forum right now.

[anon]

I don't use qBittorrent, so I didn't even know 4.3.8 was out. It will be posted soon... and there will also be a very nice surprise for everyone who needs client files :happy:

[y6nc]

Thank you. I tried mratio on several good trackers. It works on TIK, PTP and BTN, but failed on HDB. I managed to gain more than 200TiB upload on PTP.

[anon]

I managed to gain more than 200TiB upload on PTP.

Careful, you could cause another datacenter fire. Anyway, why did it fail on HDBits? sslyze says they only support TLS 1.2 and 1.3, which makes mRatio Fixer mandatory assuming you aren't using it already.

Client files are up, nya.

[qianbx]

Recently ofen show this wrong log

[2021/9/18 8:44:11] Receiving data ...
[2021/9/18 8:44:12] [403] HTTP/1.1 403 Forbidden
[2021/9/18 8:44:12] Now seeding ...
[2021/9/18 8:44:12] Torrent settings saved

[anon]

We need more details. Which tracker(s), emulation, when did this start happening, does it occur with a real client, etc.

[JohnareyouOK]

I managed to gain more than 200TiB upload on PTP.Would you mind elaborating on your cheating experience at PTP in this thread? without personal information, of course
https://www.sb-innovation.de/showthread.php?15235-PassThePopcorn-Cheating

[lotteria]

Can mRatio runs on other platform like Ubuntu, Linux, CentOS? :smile:

[anon]

Those are all the same platform :smilie4: Anyway, mRatio runs well under Linux with Mono (except for the memory reader) and also on Mac with CrossOver (there's a tutorial).

[mRatio_user]

Hey @anon, i have noticed that when i make the torrent as Seeding or Custom % (100) the downloaded amount is blank, it should be the size of the file so the ratio can be calculated correctly for now it shows an infinite symbol.

can this be fixed ?

[anon]

Hey @anon, i have noticed that when i make the torrent as Seeding or Custom % (100) the downloaded amount is blank, it should be the size of the file so the ratio can be calculated correctly for now it shows an infinite symbol.

Someone else also pointed out this behavior recently, and my response was "[t]hat's to be expected when you add something as 100% done, since there is no download traffic to calculate a ratio from (nowadays torrent clients assume a download amount identical to the torrent's size in this situation for convenience purposes, but that wasn't commonplace when mRatio was created)".


can this be fixed ?

Like with other mRatio bugs (assuming you consider this one), there is no direct fix. Editing the .mRSave file for your torrent(s) to make the downloaded amount equal the torrent size would replicate your expected behavior, at the cost of requiring you to close mRatio, do so and restart every time you add something.

The good news is that besides keeping track of which "story" has been reported to the tracker, the only thing torrent ratios are used for is the ability to stop a torrent or change its speeds when a target is reached, and you can set a target amount of upload instead.

[qianbx]

[2021/10/9 10:14:18] Receiving data ...
[2021/10/9 10:14:20] The tracker returned the following failure reason: SL Err 1
[2021/10/9 10:14:20] Torrent is now stopped.
[2021/10/9 10:14:20] Torrent settings saved.

Recently when i stop torrent show this log
emulation QB4.38/4.36 UT3.30/2.21
tracker on chdbits

[ScoolBoom]

Hello, thx for this awesome tool !
i can't find a client file for utorrent 3.5.4 Build 44632 (if someone have it..) and i saw in your post :

"Want to create your own client files?
(Members only)"

How can i do to create a client file for my version of utorrent ?

thx for the help.

ScoolB

[anon]

[2021/10/9 10:14:20] The tracker returned the following failure reason: SL Err 1

Historically, "SL Err" has been a euphemism for getting caught cheating. So maybe reduce speeds or pick different torrents? Also, is your account still working? :ninja:


How can i do to create a client file for my version of utorrent ?

Currently, these are uploaded by request unless you have access to the program required for the task. Making a note for me to do uTorrent 3.5.4 Build 44632 in the near future. Since finding specific old builds of uTorrent can be relatively difficult, you can help me by uploading a copy of it somewhere.

[qianbx]

Historically, "SL Err" has been a euphemism for getting caught cheating. So maybe reduce speeds or pick different torrents? Also, is your account still working?

It's OK.
I'm strange even i set upload speed 0KB
if i update it's ok,just stop the torrent,show this log

[anon]

Well, that's strange. Maybe you can cross-check this with RatioMaster Plus or Extreme Mod, or see if anyone has reported the same problem in the CHDBits forums.

[qianbx]

i have already try RatioMaster Plus,same error
I found a compromise

[IBS]

Good tool! I have used it for a few months. :top:

[y6nc]

I dont know why it failed on HDBits. I tried every BT client and every version, just not working.

[anon]

I asked you for details beyond "it's not working" in the last page, and you didn't answer... :unsure:

[jimit1711]

Is there a way to add transmission 3.0 to the emulated client?

Edit: Found it. Client files here: https://www.sb-innovation.de/showthread.php?34608-Transmission-3-00-(bb6b5a062e)

[anon]

I highly recommend checking out 35046 and the recommended reading at the bottom, to verify the emulation's request structure matches your client's. Due to how Transmission and Deluge are built and distributed, that isn't guaranteed!

[SB-Cheat]

Thank you. I tried mratio on several good trackers. It works on TIK, PTP and BTN, but failed on HDB. I managed to gain more than 200TiB upload on PTP.


I try to figure out how to use it properly on private trackers, can you please teach me how you did it, what I have to do, what I have to set up. What is the best way?

Thank you in advance!

[anon]

can you please teach me how you did it, what I have to do, what I have to set up. What is the best way?

All very broad questions. I suggest starting at 18705 and 19749.

[kxoty]

Hi there.
Trying to use mRatio, but always have the "!""no incoming connection received".
Any idea how to solve this? BiglyBT Extreme Mod works fine.

Thanks

[anon]

Trying to use mRatio, but always have the "!""no incoming connection received".
Any idea how to solve this?

You need to 1. forward mRatio's listen port in your router, 2. open it in your local firewall if applicable. The choice to do #1 automatically via UPnP is available, but I'd advice against using it, as it either relies on Windows' implementation (which may not be operational) or doesn't work at all, can't remember which. Also, UPnP is buggy on a lot of routers.

Remember that if you randomize the listen port on every startup, as is the default, you'll have to update the mapping accordingly.

[nageshnarian]

I am not too pro to use mitmproxy. I am not computer expert or Client mode maker expert. You were telling me all of this are difficult to me especially for mitmproxy documentation process .That's why I am asking if You can you guide me in easier way or step by step or any tutorial link that will help me. Thank You

I Can understand, how noob you are to have same username in a torrentinvite forum and in a cheating forum. Are you using same username in tracker too? Dude ask admin to change your username.

[anon]

Somehow, I get the feeling nothing particularly bad would have happened if you hadn't brought that up.

[ar_avishek]

Hey, brother long time. Can you create and provide the Qbit 4.4.0 client file, please. :( <3 Very much needed. Thanks in Advance brother.

[Test222]

Years ago I used this program to boost my upload on pornbay.org.

Now I decided to do it again but for whatever reason I'm getting an error saying "mRatio has encountered a problem and cannot continue running" and the program crashes. At first I thought it's a problem with pornbay.org or maybe the client I choose but when I started verifying those things, I realised even if I open the program and no literally nothing for like a minute, the error pop-ups anyway.

Is this program not compatible with windows 11?

[anon]

Is this program not compatible with windows 11?

mRatio is a .NET 2.0 program, and therefore supported by Windows 11 in principle. You may need to use OptionalFeatures to install pre-4.0 versions of the .NET Framework, but if those weren't in your system already, the program wouldn't have started at all and specifically noted their absence.

Since you mention a one-minute window between starting mRatio and facing the crash, I'd start by running it as administrator and disabling UPnP in the settings. If the problem persists, post the error report details here and attach the crash dump file if applicable, and I'll have a closer look.

[Test222]

@anon
Turning off running it as an administrator was enough. Thanks :)

[anon]

Turned out running it as an administrator was enough. Thanks :)

Nice, will keep that in mind. You can make it always run as admin if you set that as a compatibility flag (in the property sheet of the executable or any shortcut to it), it should protect you from forgetting about this.

[Drulo]

can someone help me out? I'm a little confused on how to use mRatio.

I have Azureus 5.6.1.2 installed. Now what do I need to do?

Someone please correct me, but from what I've been able to figure until now, I guess that I'll need to:

1) download torrent from private tracker, for example;
2) Open torrent file on Azureus 5.6.1.2 and download it;
3. Once it finishes to download, open mRatio and start the false upload through it, choosing Azureus 5.6.1.2 as emulator.

Other doubts I have:
1) Boss key - what is it, and why is it important?
2) Memory reader - what is it?

[anon]

You're already using Azureus, so why don't you upgrade to BiglyBT Extreme Mod 2.9.0.0 instead? You'll have lots of cheating features, a tutorial for everything, and no need to use a separate program.

[skedrtt]

Correction: what I said actually applies to red exclamation marks. Yellow ones merely mean a torrent does not have the private flag set further experimentation revealed presence of the private flag is not a factor, or at least not the only one.

Also, mRatio can't handle .torrent files where the "announce" key is non-existent or incorrectly set to type list instead of binary. The error messages in those cases will be "no announce" and "unable to cast object of type 'System.Collections.ArrayList' to type 'System.Byte[]'", respectively. But these should be exceptional for private trackers, and can be corrected manually via BEncode Editor without altering the info_hash.

more precisely, details?

[anon]

Details about which part.

[Howtolean]

its not work on immortalseed.me . kindly guide us .

Thx

[anon]

immortalseed.me

See 34407.

[TheScream]

Hi all!

This tool is a fantastic program for those like me who constantly fight with their ratio!
(I mostly grab "unpopular" torrents, like vintage series, comics and games, so never many peers to upload to with these. No other solution than pay money!... Or use mRatio! ;-))

On to my 2 quick questions:

- Is it safe/undetected to have the last version of mRatio work on 2 separate computers (and networks, so distinct IPs) simultaneously, using torrent files from the same account (hence effectively doubling the speed for upload ratio)?
- What is considered the limit for safe upload speed in mRatio? (I guess it may vary with each private tracker, but asking just in case) Up to now I've been using an average of 275Kb without problems, so just wondering whether I could still safely increase the speed further?


Thanks in advance to anyone able to help!
Cheers!

[anon]

- Is it safe/undetected to have the last version of mRatio work on 2 separate computers (and networks, so distinct IPs) simultaneously, using torrent files from the same account (hence effectively doubling the speed for upload ratio)?

Yes in principle. This will look like two separate clients seeding from two different computers. The vast majority of trackers allows that, with the caveat of a limit to how many addresses you can use simultaneously (usually 3).

On a sidenote, be aware that seeding the same torrent with multiple clients from the same IP is not allowed, to avoid "cornering the market" abuses where no one else can get upload because you make up most of the swarm at no cost to yourself.


- What is considered the limit for safe upload speed in mRatio? (I guess it may vary with each private tracker, but asking just in case)

Your guess is correct, and therefore giving a single specific answer is impossible. See 19749.

[TheScream]

Alright! Thank you very much Anon for your comprehensive reply.
This makes it perfectly clear as to what I should and shouldn't consider to help raise my ratio now.

And yes, I was correctly guessing about using same torrent with same IP (ie. same home network), since I assumed the point of reference for the tracker to detect cheating is the IP, right?
Hence my question about using different comps on separate networks (=distinct IPs) and also different torrent files. My only concern was that there were still one common denominator of course (the account credited, obviously).
You clarified that fear for me, so that's cool!

Cheers man! :)

[anon]

And yes, I was correctly guessing about using same torrent with same IP (ie. same home network), since I assumed the point of reference for the tracker to detect cheating is the IP, right?

For this particular kind of cheating, yes :richter:


Hence my question about using different comps on separate networks (=distinct IPs) and also different torrent files. My only concern was that there were still one common denominator of course (the account credited, obviously).
You clarified that fear for me, so that's cool!

You're welcome. Another thing to be aware of, and which I forgot before, is that all instances of the torrent must be at 100%. Do not seed torrent A from location X while fake-downloading it from location Y because it'll look like you're trying to download from yourself (which is forbidden as any freeleech torrent could be abused to get potentially endless amounts of upload).

[Unregistered]

it save Click on an option
scrape with out activation memory reader
and the files in mode stop ??

[anon]

it save Click on an option scrape with out activation memory reader

Scrape requests don't require or use any of the data captured by the memory reader, so yes, it's safe.

[donkeykong]

hello guys I'm back from a long time and need to ask some questions because I don't remember how to cheat well

I see the latest version of mratio is still the same one I had on my pc from many years ago, I want to know in your opinion is it still good to use mratio or are there better tools now? what do you personally use? also if I want to use a normal client and a client for cheating on the same tracker at the same time is it ok as long as I use the right client files for mratio and have different torrents on each client from the same tracker? what if I remove a torrent from my real client and add it to mratio?

[anon]

I see the latest version of mratio is still the same one I had on my pc from many years ago, I want to know in your opinion is it still good to use mratio or are there better tools now?

Quick answer: install and use 34407. There are no known serious flaws in mRatio beyond what's addressed by that addon.


if I want to use a normal client and a client for cheating on the same tracker at the same time is it ok as long as I use the right client files for mratio and have different torrents on each client from the same tracker? what if I remove a torrent from my real client and add it to mratio?

The answers to this haven't changed =]

[donkeykong]

Quick answer: install and use 34407. There are no known serious flaws in mRatio beyond what's addressed by that addon.



The answers to this haven't changed =]

Do I need to use mratio fixer if I don't get errors? I put up some torrents on mratio and all work with blue smiling face.

Also I'm using it together with my real client so I'm assuming no problems...hopefully.

[anon]

Do I need to use mratio fixer if I don't get errors?

Not if you're so fortunate, but such a scenario is the exception rather than the rule these days. If you hover your mouse cursor over the smiley icon or check the torrent logs, you'll be able to spot error messages (if any) and then decide.

[donkeykong]

Not if you're so fortunate, but such a scenario is the exception rather than the rule these days. If you hover your mouse cursor over the smiley icon or check the torrent logs, you'll be able to spot error messages (if any) and then decide.

I don't see anything when I hover the mouse, I have 3 different trackers there but they seem to be working. But if mratio is dangerous I think I will switch to rm+ rather than run two programs for mratio, rm+ works fine on its own right?

[anon]

I don't see anything when I hover the mouse

"If you hover your mouse cursor over the smiley icon or check the torrent logs..."


if mratio is dangerous

"There are no known serious flaws in mRatio beyond what's addressed by that addon."


rm+ works fine on its own right?

Unfortunately it has a bug preventing responses from being decoded correctly for most trackers that use Cloudflare, which is... many of them. Feel free to give it a try, but if you see errors complaining that the tracker response is empty, you'll have to wait for the next version.

[donkeykong]

"If you hover your mouse cursor over the smiley icon or check the torrent logs..."

"There are no known serious flaws in mRatio beyond what's addressed by that addon."

Unfortunately it has a bug preventing responses from being decoded correctly for most trackers that use Cloudflare, which is... many of them. Feel free to give it a try, but if you see errors complaining that the tracker response is empty, you'll have to wait for the next version.

Hmm I'd rather use a ratio tool for cheating over a modded client for simplicity but it seems they all haven't been updated in a while. I'll use mratio fixer for now because I have no experience with the biglybt mod but it seems clients are a better choice nowadays?

[anon]

it seems they all haven't been updated in a while

Fortunately there aren't any critical bugs beyond what we've already discussed (although RM+ does have a fairly long roadmap).


I have no experience with the biglybt mod

That can be solved by reading the documentation.


it seems clients are a better choice nowadays?

There aren't right or wrong answers here, the decision depends on preference and context. Or as I said recently...



...the fact mRatio, RatioMaster Plus, Serenity and others also have a dedicated user base [vs. Extreme Mod] prove there's a fairly situational and personal element to this decision. For example, BBTEM has relatively high hardware requirements and wouldn't be my first choice for fake-seeding a few thousand torrents to get bonus points (not the mod's fault, the base client is written in Java after all).

[donkeykong]

I installed biglybt to try it out in a VM to avoid bloat on my main computer and it seems like it installed some network device on my main computer regardless, mission failed lol. Anyway I didn't like the interface and wouldn't switch to it as main client and java is even more bloat so I'm not going to do that. I just wish there was a ratio tool that was up to date and worked out of the box that I could use without worrying.


(although RM+ does have a fairly long roadmap)..

What do you mean by that?

[anon]

I installed biglybt to try it out in a VM to avoid bloat on my main computer and it seems like it installed some network device on my main computer regardless

Your virtualization program did that, BiglyBT does not install any network interfaces (let alone on the host of a virtualized system).


Anyway I didn't like the interface and wouldn't switch to it as main client

The interface is configurable, and I don't expect anyone to use the default settings, with the sidebar and built-in browser and featured content :pinch:


java is even more bloat so I'm not going to do that.

Unfortunately the reliance on Java and subsequent resource usage is indeed a make-or-break point for many people. As someone who last upgraded his computer on 2015 I like it as much as you do, but it's a fair price to pay in exchange for having the best and most feature-filled mod in existence.


I just wish there was a ratio tool that was up to date and worked out of the box that I could use without worrying.

A lot of people like JOAL. It's way less complex than mRatio or RatioMaster Plus by design, however. Whether that's an asset or liability depends on what you want to do.


What do you mean by that?

There are other, lower-priority bugs to address and an ambitious list of planned features, including the ability to connect to peers and get a real-time picture of swarm conditions.

[donkeykong]

Your virtualization program did that, BiglyBT does not install any network interfaces (let alone on the host of a virtualized system).



The interface is configurable, and I don't expect anyone to use the default settings, with the sidebar and built-in browser and featured content :pinch:



Unfortunately the reliance on Java and subsequent resource usage is indeed a make-or-break point for many people. As someone who last upgraded his computer on 2015 I like it as much as you do, but it's a fair price to pay in exchange for having the best and most feature-filled mod in existence.



A lot of people like JOAL. It's way less complex than mRatio or RatioMaster Plus by design, however. Whether that's an asset or liability depends on what you want to do.



There are other, lower-priority bugs to address and an ambitious list of planned features, including the ability to connect to peers and get a real-time picture of swarm conditions.

I didn't realize it was the VM program that did that but now that I think about it it makes sense. I'm sure the interface can be customized but I'd like to keep the idle power consumption of the PC as low as possible so I want a lightweight client, a java program running all the time probably wouldn't be good for that, especially with many torrents. The other alternative I see is uSerenity but it's based on utorrent 2.2.1 and I don't want to use such old software, plus it also doesn't work out of the box due to technical issues with piece and torrent sizes, GGN mentioned that yesterday when they announced they will be blacklisting utorrent in 6 months.

As for Joal I have no opinion, never tried it, does it work with no issues on any sites? Can it be run along with a real client on the same websites at the same time like mratio? Complexity is not a big problem to me, I just want a clean interface and the obvious options for speed that changes every x minutes, client spoofing/memory reader, choosing your own port, adding torrents as seeder, etc. I know mratio has things like automated waffles method and flashing but I don't use that anyway.

I chekced a few last pages of the rm+ thread and saw the developer is active and working on 2.2 so that's good news at least, previously I had just seen the last update is from 2017 and I thought it was also abandoned

[anon]

The other alternative I see is uSerenity but it's based on utorrent 2.2.1 and I don't want to use such old software, plus it also doesn't work out of the box due to technical issues with piece and torrent sizes, GGN mentioned that yesterday when they announced they will be blacklisting utorrent in 6 months.

The 1 TB torrent and 16 MB piece limits have been a vexing issue for a while now, due to the inflation in file sizes since 2010 (we didn't have 4 GB TV episodes and 16 TB hard disks back then). Some people have been busted for emulating uTorrent 2.2.1 and then cheating on torrents they shouldn't be able to add in the first place.

Anyway, I skimmed through GGn's announcement via /r/trackers. Besides the parts about uTorrent being proprietary software and having made dubious software bundling choices in the past, all of the criticism applies exclusively to version 2.2.1, but it seems they didn't want to take any half-measures. Even if banning this highly popular client seems like shooting themselves on the foot, I can respect that and the generous time limit given, and ultimately their site = their rules.


As for Joal I have no opinion, never tried it, does it work with no issues on any sites? Can it be run along with a real client on the same websites at the same time like mratio? Complexity is not a big problem to me, I just want a clean interface and the obvious options for speed that changes every x minutes, client spoofing/memory reader, choosing your own port, adding torrents as seeder, etc. I know mratio has things like automated waffles method and flashing but I don't use that anyway.

The fact JOAL is also Java-based may make these questions moot :gnoes:


I chekced a few last pages of the rm+ thread and saw the developer is active and working on 2.2 so that's good news at least, previously I had just seen the last update is from 2017 and I thought it was also abandoned

Progress is slow - partly my fault - but it's on the works.

The best choice I see for you right now is mRatio. If you install Fixer in service mode after doing the initial setup, you won't even notice it's there.

[donkeykong]

The best choice I see for you right now is mRatio. If you install Fixer in service mode after doing the initial setup, you won't even notice it's there.

Yep this is my conclusion as well. Doing that for now and waiting for the next RM+ version.

[Unregistered]

Torrent showing no announce and the finish button is greyed out. Can someone please help me?

[anon]

Please upload a copy of the offending .torrent file to https://tmp.ninja/ or another file host and I'll have a look. (If you're the same person who just reported a similar problem with RM+ and the torrent is the same, then let me know)

[Decujus]

Is there a way to run mRatio at startup minimized?

What I actually wanted was a way to make it startup with windows and also start all torrents automatically.
If not possible, I want it to at least run at startup minimized. I tried puttin a shortcut at Windows startup folder, and it does start, however if in the shortcut properties I set it to run in a minimized window, whenever it starts from that shortcut, it gives an error saying mRatio had to close.

[anon]

and also start all torrents automatically

This can be done by passing parameter -startall to the executable.


if in the shortcut properties I set it to run in a minimized window, whenever it starts from that shortcut, it gives an error saying mRatio had to close

This is very strange. Unfortunately I can't test this right now, but can you try setting the shortcut to run mRatio as administrator?

[Decujus]

This is very strange. Unfortunately I can't test this right now, but can you try setting the shortcut to run mRatio as administrator?

The thing is, for me to run mRatio as administrator at startup, I have to use windows task scheduler instead of just a shortcut at startup folder. I can add arguments on task scheduler, so I can use -startall. However I can't make it start minimized unless there's also an argument for that. The only other way I can think of is making a batch script with 'start /min' but it'd be best if there's argument :)

[anon]

As long as it gets the job done... :idunno:

By the way, I don't actually know if running as administrator will solve this. I'm only recommending it as a possible solution, since it did fix a "mystery" crash reported some pages back. (It's also necessary if you want to use the uTorrent memory reader, but that doesn't seem to be your case.)

[Decujus]

As long as it gets the job done... :idunno:

By the way, I don't actually know if running as administrator will solve this. I'm only recommending it as a possible solution, since it did fix a "mystery" crash reported some pages back. (It's also necessary if you want to use the uTorrent memory reader, but that doesn't seem to be your case.)

Unfortunately running as admin didn't solve the problem. The full message error is: 'mRatio has encountered a problem and cannot continue runnning.'

[anon]

I'll look into it as soon as I can get my virtual machine running. In the meantime, I guess you'll have to settle for minimizing the window yourself (or perhaps using AutoIt or similar if automating this is of critical importance).

[Decujus]

Thanks! The reason I want it minimized is because I mine in the same machine, and after the full LHR unlock came through, if there's a window open, it drops 10mh permanently until I reboot the PC. So that's why :(

[Composer]

thanks. i have downloaded the program from some other website and it didnt work properly. may be i am doing something wrong. will try now again.

not working sadly.

[anon]

I miss the double post merger :dabs: But there are things that must be protected.


i have downloaded the program from some other website and it didnt work properly.

People who reupload our mods and tools elsewhere do a lot of unintentional damage, since they rarely provide updates or support, and YouTube/Blogspot/GitHub have very good SEO rankings for obvious reasons... meaning it's easy and quick to find a potentially obsolete version of a program that doesn't work and/or can get you banned. You have been registered here long enough to know what mRatio's original source is, though?


not working sadly.

No details = impossible for us to help. Error message and log entry would make a good start.

[RyansCruz]

its not working on win10 latest version

[anon]

not working sadly.


No details = impossible for us to help. Error message and log entry would make a good start.


its not working on win10 latest version

Well, that's just silly.

[zacader]

Hello, I have a issue. I import a torrent file , 3.38MB . mRatio announce Overflow caused by arithmetic operation (translate by google) . Is this because the size of the torrent is too large ? Is there any way to fix it ?

[anon]

Please send me a copy of the .torrent file and I'll have a look (although it may not be soon).

[zacader]

Please send me a copy of the .torrent file and I'll have a look (although it may not be soon).

I have sent you a Private Message include MEGA Cloud Storage file link

[anon]

Got it. A quick look shows this is a hybrid v2 torrent, but those are supposed to be backwards compatible. More details when I actually get around checking this.

[qwertykeys]

mRatio is throwing 502 Bad Gateway error for the last few days. Any solution available?

[j0__0hn]

FYI I've had sucess running this tool on linux ubuntu 20.04 with crossover tool and a win7 x64 bottle

[anon]

Under Linux, mitmproxy can run natively, and "porting" the rest of mRatio Fixer should be easy.

[j0__0hn]

@anon thus you suggest mRatio Fixer would be better/safer ?
edit: nevermind, mRatio Fixer is actually a mitm proxy to run next to original mratio

[garrestampus007]

@anon sir, I'm new here. I wanted to know if there is any way to increase the per-torrent-upload-speed in mRatio. Please let me know.

Edit: Never mind, got the answer

[Byden2050]

Few tracker not support this . The tracker become red.

[Falcon]

i will make a dutch translation for it.

it works perfect :)
Can some update uTorrent clients up to version 3.5.5. (build 49096)?

[Falcon]

Dutch language now available:

https://workupload.com/file/NdYbmSFuqBY

pasw=N9Fjfk8eCE

[Byden2050]

MRatio is slowing down my pc. How to fix it.

[anon]

Can some update uTorrent clients up to version 3.5.5. (build 49096)?

Please have a look at 35046.


MRatio is slowing down my pc. How to fix it.

If you do a search, you'll find tips on how to decrease mRatio's CPU usage.

[qianbx]

recently show this erro.how to fix

21446

[anon]

Next time please provide a translation, trying to compensate for the inaccuracies of OCR and machine translators isn't fun. Anyway, the message in English would read as follows.


The magic number in GZip header is not correct. Make sure you are passing in a GZip stream.

If you aren't using mRatio Fixer already, do so (at least for the affected torrents). Otherwise, please send me a copy of some .torrent files that trigger this error.

[qianbx]

Next time please provide a translation, trying to compensate for the inaccuracies of OCR and machine translators isn't fun. Anyway, the message in English would read as follows.



If you aren't using mRatio Fixer already, do so (at least for the affected torrents). Otherwise, please send me a copy of some .torrent files that trigger this error.

Affected only on lemonhd.I will try mRatio Fixer v7,very thank you.

[qianbx]

Recently show this wrong error

Unexpected EOF or 0 bytes received from transport stream

just on lemonhd

[anon]

My answer is the same as in post #1975...

[qianbx]

I have used,but unstatble,and don't know why these strange erro just happend on lemonhd

[anon]

Updated the attachment to add Falcon's Dutch translation and a readme file. Now I'd just need to get around checking those bug reports...

[JohnareyouOK]

TIL sellers are selling mRatio on TaoBao (basically the chinese ebay), advertising it as seedbox software, specifically to the innumerate. :lolhuh:

[anon]

mRatio is the best seedbox ever, even if its maximum speeds are low by modern standards. Let me guess, no refunds?

[JohnareyouOK]

No idea, but according to the reporter, after searching for the software name “mRatio” and the internet told him it's a cheating tool, he went back to the seller with questions, and the seller just explained to him “being installed with this software on a VPS or server is exactly how every seedbox works, nothing to make a fuss about”. ;)

[mmmmm]

suggestion:
1. the same torrents info hash but only different trackers (load the tracker to existing torrent) .

mR
don't accept adding a new torrent with same info hash already added before and show warning torrent already added ,
but the different is the tracker name.

bittorrent
show the same warning but offer add the tracker to the already added torrent and send announces to both trackers .

[anon]

bittorrent
show the same warning but offer add the tracker to the already added torrent and send announces to both trackers .

BitTorrent clients do not account for traffic on a per-tracker basis, so when you add trackers to a torrent, all of them will always get the same reports. This has led to many bans for alleged ratio cheating. Nowadays it's commonplace to automatically add a tag inside the info dictionary to make .torrent files unique, so this is less of a problem than it used to be, but can still occur.

mRatio basically acts like this to protect you from yourself. The only suggestion I have is running multiple instances, Fixer includes two methods to do that.

[mmmmm]

mRatio basically acts like this to protect you from yourself.

mR
while detect the info hash already added then do more check for the tracker is it the same or not ?
tracker is different then mR add the torrent .
The248 can do that for the future .


The only suggestion I have is running multiple instances, Fixer includes two methods to do that.
:top:

[anon]

The248 can do that for the future .

Really wish he would show up here. My attempts at contacting him have been unsuccessful (mind you, I only have the e-mail address associated to his account).

[mmmmm]

Really wish he would show up here. My attempts at contacting him have been unsuccessful (mind you, I only have the e-mail address associated to his account).

send me his e-mail .
can you try sending e-mail to cheatuga (https://www.sb-innovation.de/member.php?10081-cheatuga) asking about him (i don't have his e-mail)?

[anon]

can you try sending e-mail to cheatuga (https://www.sb-innovation.de/member.php?10081-cheatuga)

Good idea, they've both been in contact since at least the SpecialMods days.

[qianbx]

show this error
[2023/5/29 14:38:23] Receiving data ...
[2023/5/29 14:38:25] Incorrect bencode data!
[2023/5/29 14:38:25] Now seeding ...
[2023/5/29 14:38:25] Torrent settings saved.

I have already open mRatio Fixer v7

[anon]

I have already open mRatio Fixer v7

Wait for v8 =]

[SB-Cheat]

How can be fixed this error?: Received an unexpected EOF or 0 bytes from the transport stream.

I tried already with mRatio Fixer 7, and after I did the settings I received: Error establish the connection: No connection could be made because the target machine actively refused it 127.0.0.1:8080

[mmmmm]

How can be fixed this error?: Received an unexpected EOF or 0 bytes from the transport stream.
use-mRatio-Fixer-v7 (https://www.sb-innovation.de/showthread.php?34407-mRatio-Fixer-v7)


I tried already with mRatio Fixer 7, and after I did the settings I received: Error establish the connection: No connection could be made because the target machine actively refused it 127.0.0.1:8080
check this again :

[mmmmm]

@ SB-Cheat
also check this

[j3dnooki]

is there any chance to randomize upload speed?

[anon]

Look closely at the advanced preferences for your torrents...

[j3dnooki]

i really dont get it - I opened my qbittorrent 4.5.4, then mratio (with fix) and i cant use memory reader. I mean there no ption to apply, search - nothing.

I mean when i want to use mratio i have to open qbittorrent too?

[mmmmm]

Memory reader here for utorrent only
No need to open.

[anon]

You know, this is why I recommended you read and search before doing anything...

[j3dnooki]

You know, this is why I recommended you read and search before doing anything...

Sorry, there's a lot of thread, and a lots of germans :)

[j3dnooki]

Everything is good but i have a few questions. Im pretty sure, that somebody told it before but:
1. On my tracker sometimes I have 'offline' status in a few torrents (there's information about getting points, only 50%).
why?
edit: my upload is updating good on my tracker
2. About seeding - when I turn off upload, I still recive points on my tracker - is it safe? I have something like 40 torrents (4 with upload).
3. Do i need to check how many ppl downloading torrent at this moment? or maybe peers in mratio is good?